20 Most Recent 1995 kawasaki ZX-9R Ninja Questions & Answers


Hi, Anonymous and the usual suspects are:
1. Faulty wiring to any safety switch.
2. Safety switches loose at the mounting point.
3. Faulty kickstand safety switch.
4. Failed kickstand safety switch circuit diode.
5. Stretched side stand spring.
6. Side stand not coming up far enough to disengage switch.
7. Faulty clutch lever safety switch.
8. Faulty neutral safety switch.
9. Clutch not properly adjusted.
10. Clutch plates sticking, forward lurch
For more information about your question and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Shuts down when clutch is released KawiForums Kawasaki Motorcycle Forums
https://www.kawasakimotorcycle.org/forum/mechanics-corner/64506-let-out-clutch-she-stalls-any-ideas.html
Kawasaki Ninja ZX 9R Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

1995 kawasaki... | Answered on Jun 28, 2019


Hi, Henkogarage for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
The Kawasaki 900 at MotorBikeSpecs net the Motorcycle Specification...
http://www.zxforums.com/forums/zx-9r-forum/27012-fork-oil-how-much-oil-fill-front-forks.html
KAWASAKI ZX900 C1 Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

1995 kawasaki... | Answered on Mar 28, 2018


Hi, Allan for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Spark plug gap question KawiForums Kawasaki Motorcycle Forums
https://www.weeksmotorcycle.com/basic-kawasaki-reference.html KAWASAKI ZX900 C1 Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

1995 kawasaki... | Answered on Mar 28, 2018


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
zx9r water pump leak
How to replace motorcycle water pump chain tensioner
Kawasaki Ninja ZX 9R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


1995 kawasaki... | Answered on Mar 26, 2018


Your spark plug gap is too close for me. I'd go for 1mm at least, maybe 1.5. (~ .040 - .060 )
It would be a quick check/fix.
After that it's carb stuff. Set them up initially 1 1/2 turns out and adjust from there. Make sure your float level is correct.
Wet/black is too rich for sure.

1995 kawasaki... | Answered on Sep 26, 2017


From a motorbike shop selling parts. Cheers

1995 kawasaki... | Answered on Dec 19, 2014


depending on what kind of noise,very possible it is timing chain

1995 kawasaki... | Answered on Feb 16, 2014


you have blocked jets in the carbs,,the carbs need to be removed and cleaned.

1995 kawasaki... | Answered on Feb 07, 2013


i would say that youve got an air bubble or bubbles in it i would let bike get warm and then pop the cap -fluid will come out so be carefull. dont shut off your bike let it run with cap off and fill it up you should see the water flowing also squeeze the bottom hose alittle to help kick up the air becarefull becouse it will be hot so where gloves this should get the air lock out hope this helps good luck

1995 kawasaki... | Answered on Jul 06, 2011


not everytings perfect--theres a clog or weak water pump and the circulation doesnt match the rpm-buy a clymer manual

1995 kawasaki... | Answered on May 09, 2011


Looks like a d & d pipe on it ,, is it a full system or just a slip on ? if a full system you'll need a jet kit and a timming advancer would'nt hurt either ,,, but if it's had the problem since day one ,,, you should've taken it back to the dealer a.s.a.p. and let them deal with it before your manufacturer waranty was expired, a dirty air filter, valve adjustment are also possible cures in addition to the jet kit. float highth in the carbs , jet size and needle highth will all change and improve your over all peformance...if it's done had all that ,, it was installed wrong ,, get it on a dyno to tune it correctly with the air/ fuel ratio at 12.5 - 13.5....good luck.

1995 kawasaki... | Answered on Nov 04, 2010


my heart is broken again..how to solve this?

1995 kawasaki... | Answered on Feb 03, 2010


I suggest u replace the flasher relay.

1995 kawasaki... | Answered on Feb 02, 2010


have you checked bikebandit.com yet? if you can't find it there, check your local kawasaki dealer. i've been certified by k-tech and know for a fact that kawasaki stands by there product saying they will always make whatever part is needed for any of their bikes no matter the age. if you still have trouble email me and i'll find it for you.

1995 kawasaki... | Answered on Jan 31, 2010


well you either have a blown head gasket or a cracked liner also a blown water seal what do you mean by not returning you mean its not returning to radiator check the oil level if high water seal has gone or if you have whit smoke your gasket or cylinder liner has gone strip and replace if soo good luck bud

1995 kawasaki... | Answered on Sep 01, 2009


Readjust the carbs.The bike has lean mixture (too much air).Check your spark plug's electrode color.It must be dark brown.Neither black nor white.

1995 kawasaki... | Answered on Aug 08, 2009


check wires under seat and around frame sounds like you have a bare wire somewere.

1995 kawasaki... | Answered on Jul 01, 2009


yep, same link and same position.

1995 kawasaki... | Answered on May 21, 2009


engine no. is located on the top half of crankcase,behind cyl,on right side(next to clutch cover)

1995 kawasaki... | Answered on May 06, 2009

Not finding what you are looking for?
1995 kawasaki ZX-9R Ninja Logo

Popular Tags

33 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6151 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

ROB

Level 3 Expert

858 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

ZX-9R Ninja kawasaki

  • ZX-9R Ninja kawasaki

Most Popular Question

flush radiator bled ran great

  • Motorcycles
Loading...