There may be several things causing this fault (your sure the plug is fine?)
The ignition systems on these bikes are pretty basic. The Stator plate provides power to the CDI unit, which builds up until the pulser tells it to send the power to the coil and produce the spark
1. is there voltage from the stator plate (under flywheel) - you can test with a basic multimeter.
2. is the pulser sending a pulse - also can be tested with basic multimeter
3. is the CDI blown? - swap out to test
4. Is the Coil blown? - can be tested with multimeter
it is also very possible that you may have got a couple of wires mixed up when you switched engines.
631 views
Usually answered in minutes!
×