Yamaha tw 200 10,000 miles
SOURCE: glowing exhaust header yamaha wr250f
It won't be valve timing or clearance. The fuel/air mix would be the culprit. Clean the carburetor with special attention to the idle circuit. Remount the carb with new manifold gaskets. A manifold air leak will mess up the mixture. Also, get a new spark plug one heat range colder than stock. Hope this helps out!
Please rate this solution. Thanks!
SOURCE: 2007 YZ450F - What is the valve clearance?
See the diagram below. Cold, the intake sets at .004 to .006 The exhaust sets at .008 to .010
SOURCE: what is valve clearance for a 250 yamaha timberwolf
what an *******. If I had a manual or my library had one I wouldnt be asking the question. If I need help fixing something dont tell me to go jump in a lake just dont answer
SOURCE: what are the valve clearances on a yamaha 125 TW
They are listed in the service manual.
You can download a free one at
http://www.yamaha-motor-europe.com/community/service/manuals.jsp
Good luck!
SOURCE: what are the Valve clearances for a 2004 yamaha yz450f
Valve clearance (cold):
Intake:
0.10 ~ 0.15 mm (0.0039 ~ 0.0059 in.)
Exhaust:
0.20 ~ 0.25 mm (0.0079 ~ 0.0098 in.)
1,173 views
Usually answered in minutes!
×