I removed seat and sidecovers then disconnected wire from right side of battery (facing front of bike). Do I have to disconnect any of the wiring on top of battery to access other terminal?
SOURCE: Yamaha Virago XV700 - 1987 Seat Removal
Most Yamaha models have 2 bolts holding the seat on, usually located between the top shock mounts and the side covers. You should be able to find them without too much trouble, but remember- they are metric. Hope this helps.
SOURCE: 1990 Yamaha Virago 535 Parts interchangeable with 2001 virago 250
Sure mirrors, nuts, bolts and screws. Maybe a fender and a bit of other stuff. But for the most part not much will match up and now you have this ugly monster in your garage and your next job is to figure out exactly how you are going to get rid of the da-- thing. Look a bit harder and get a match for your bike. Now you have something worthwhile.
A “very helpful” rating for this answer? Thanks!
SOURCE: how do i adjust the idle on my 1995 yamaha virago
On most bikes and four wheelers, this is done by a throttle stop. the position of the stop is usually adjusted by a screw. Remove the tank. turn throttle and see what moves by the carb/ injectors. When you return throttle to idle, the moving piece will come to rest on the throttle stop. You can now adjust its position by turning that screw.
SOURCE: is this a good frist bike to learn how to ride?
hi,generally speaking yes,they have a very forgiving engine with gentle power delivery(no sudden surges of power like sports bikes)they are also very comfy to ride and yet even though it is only a 250 it will cruise quite comfortably at highway speed..enjoy..hope this helps
SOURCE: front fork seals leak
what is the problem in the following situation.in the following situation starts even if shift is in neutral position.before changing the alternator was not so.yamkaha fj 1200 1 tx 1987
226 views
Usually answered in minutes!
×