20 Most Recent 2005 TVS Victor GLX Questions & Answers

PLEASE GIVE THE LIST OF PARTS THAT YOU HAVE CHANGED..

Have you INSTALLED A FUEL LOCK..? IF YES CHECK WHETHER IT IS FUNCTIONING NORMALLY (..WHEN TURNED ON/RESERVE..) SECONDLY CHECK THE FLOW OF FUEL IS GOOD FROM FUEL KNOB/LOCK UPTO THE ENGINE.. PROBABLY, THIS SHOULD HELP..

is choke stuck on, whats air filter like, does the mix screw on carb need adjusting, generally tight in and 1 and 3/4 turns out

clean your bike's carburator and it's jet manually or by the good mechanic. bike's engine need some changes in it. like...piston, volve's, timing chain and engine oil with spark plug.

it cost you some of 4500/- INR.

i hope...it will help you.

freeicon

see...this is not the right solution ectually! he (mechanic) must had to tell you the truth. that there is no need to change wheel bearing & chain damaged along with complete change the things. if you had no idea at that moment than you must resell this bike and should go for new one. but.... what will you do? if the same situation happen again in future with your new one.

you must changed the fork oil just. these cost you just around 650/- per pair. mechanic was the over smart and he knew that you do not know anything about the bike and it's service with spare part.

i have too this one TVS VICTOR GLX 125 CC 2004 nov. model. and i m very much satisfied with it. if you compare with these days bike's ... than you realize...it give more mileage than other and less maintainable.

so.. if you have that bike now a days... so keep it with you. and find better mechanic. bike is not problem.

I honestly cannot determine the question or if there is one? please rephrase.

the 3M protective film works really well, I have it on the nose of my GTI. It will add some sheen, but I highly reccomend it

there is no way for fuel to get passed the rings right? So if you filled the head with fuel, it would just work its way down the exhaust pipe and out the back, just like its doing. The only way of getting fuel into the sump is; if you have seriously bad rings (it would be burning oil) OR if its getting through the breather system. I don't even think if the injectors were on full-time, it still wouldn't get into the sump... very strange. Are you sure its not coolant? A serious coolant leak can be completely unnoticeable from the outside, but catastrophic to the inside. __________________

The one that fits the space! The existing one has numbers on it and those numbers are inside and outside diameter and width. Or take the wheel and the axle to a machine shop. Or just buy the bearing! https://www.google.com/search?q=LCD+for+Ecco+32+inch ..

Its obvious you/someone has tuned the engine wrong. Take it to a professional.

Dear Friend, Please try to visit nearest local 2-wheeler workshop, Since these local mechanics having wide experience in different brand 2-wheeler engines, comparing to authorized service centers, your bike will fixed definitely.