20 Most Recent
2008 Honda CRF 450 R Questions & Answers
I need torque specification for
Here are images from the service manual. There is more to the installation ; cam mount torque and valve timing for example. My email is
[email protected]. Email me and I will try to email back with a PDF attachment of the head installation chapter from the factory service manual.
Ok i have a 2009
Have you tried another spark plug. It is easy to wet foul a new plug with ethanol fuel. New spark plugs need to be driven a few miles before there is a enough exhaust carbon to seal the crack between the metal body and the insulator. It is also possible that the resister in your spark plug cap has burned out causing a weak spark or no spark at idle.The spark plug cap is part #2 on the following diagram.
http://www.bikebandit.com/houseofmotorcycles/2009-honda-crf450r/o/m18024#sch583897
The OEM spark plug cap is $35 but you may be able to use an NGK replacement for around $5.The spark plug cap simply unscrews off of the end of the wire and should read 5000 OHM's on a voltage meter. If the reading is higher or lower replace the cap.
Hi ihave a 2003 honda
Hi, your water pump drive shaft has warn a groove where the water pump oil seal sits, so you need a new water pump shaft gaskets and seals. Maybe new shaft bearings $100-180 to get it fixed. The water neck from the cylinder head needs a new o'ring..........
Not finding what you are looking for?