SOURCE: Ford Bronco II spongy brake pedal
if the booster is bad the pedal would be hard sounds like the e-brake is stuck take off the drums and make sure the arms are all the way back then did you adjust the rear brakes after changing the shoes
SOURCE: isuzu mu 1993 brakes still spongy after being bled
hello the master cylinder may be bad .thanks
SOURCE: 2005 f150 spongy brakes
it sounds like your still not getting all the air out of your lines. it helps to have a brake bleeder but they are expensive, it also could be that the gasket inside the master cylinder is inverted even if it is a new master cylinder this could be the case, ive had four bad remanned ones in a row, before i got a good one... hope i could help
SOURCE: Spongy brakes 1996 Chevy C1500
You can adjust the shoes outward on the rear by removing the wheels and drums, then above the axle but below the wheel cylinder you will see an arm that is horizontal, pushing both of the shoes outwards. There should be an adjustment nut that you can turn to extend the arm to push the shoes out.
SOURCE: changed caliper on 2005 ford freestar and now brakes are spongie.
When bleading the brakes have someone there watching to make sure the master cylinder never runs out of brake fluid or all of your time spent bleading them will be waisted.
46 views
Usually answered in minutes!
×