1991 Toyota Pickup Logo
Posted on Feb 03, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

My turn signals are NOT working, but emergency flashers are. Any ideas? They just went out today-- wondering if it's 1/ fuse 2/ turn signal relay or...?

1 Answer

ZJ Limited

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Toyota Master 17,989 Answers
  • Posted on Feb 03, 2011
ZJ Limited
Toyota Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jul 15, 2008
Answers
17989
Questions
0
Helped
14459380
Points
60858

Check for the FLASHER. For 1991 Toyota Truck Pickup 4WD (4 cyl) 2.4L FI 4cyl the Flasher is located front seating area, driver side, under dash, mounted driver side of steering column.

Hope this helps.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

My car signal stop funtion

have you checked the turn signal relay! It is above your left leg under the fuse access. under dash. do your emergency flashers work, because the relay is a combination relay for e-flashers and turn signals. if the flasher unit is ok, you may have a bad bulb or a short to ground.
0helpful
2answers

I have no signal lights

Do the emergency flashers work? If they do the turn signal flasher relay is probably bad.There should be 2 one for turn signals and one for emergency flashers. What you can do if emergency flashers are working is turn them on and see where the clicking is coming from.The 2 flashers are usually very close to each other.
2helpful
1answer

My turn signals have stopped working. I replaced a bulb, thinking that was the problem but they still dont work. I think it may be the actual turn signal switch (in the steering column) but was wondering...

The flasher relay is mounted in the main fuse panel under the dash, driver's side.Are the lights coming on at all, or is there nothing ? it is possible that you may have a bad ground wire to the signals. Do the emergency hazards work ( lighting up and flashing?)If so, then your ground is good and it could very well be the flasher. You should be able to switch the emergency flasher for the turn flasher for a test of the circuit. The flashers should be mounted side by side in the fuse panel - just exchange them and test. If so, keep the emergency flasher there and take the turn flasher in to replace. The parameters should be the same so you can just leave the E. flasher relay in place and out the turn flasher where the E. flasher was.
0helpful
1answer

Turn signals not working

Do the emergency flashers work? If so the turn signal flasher relay probably went bad. If flashers are not working either may want to check fuses.
0helpful
2answers

No turn signals but flashers work

There a two modules 1 for the turn signals and 1 for the flashers. Look under your dash around the steering wheel and fuse box area for one that is in the wiring harness.
1helpful
2answers

Turn signals don't work

i have a similar problem but my left signal works, when i turn the right on it just does an annoying buzz sound. if you can think of any explination for such shinanogins help would be greatly appreciated
3helpful
3answers

Blinkers stopped working

Your F--150 has 2 flashers, emergency and turn signal. Both are mounted on the fuse block under the dash. The turn signal flasher is mounted on the front of the fuse panel, the emergency flasher is mounted on the rear of the fuse panel. so replace the turn signal flasher should solve the problem. Let me know how it goes.
0helpful
1answer

1991 Ford E150 turn signals do not work,emergancy flashers flash constantlly unless the flasher relay is unplugged from fuse block

Hi,

If I understand you right based on your post/description, the signal lights would still turn on even if any or both of the flasher relays are removed. Should this be the case, then the signal lights are not getting the power from the flasher relays but from the brake light circuit.

Perhaps your concern is not with any of the flasher, but simply missing or loose ground more particularly with the rear lights. Perhaps you could try determining which of the wires for the brake lights and signal lights (as they come out of the light assembly) would be ground . A test and even possibly a temporary workaround is to hard wire a second ground connection from the determined ground wire of the lights and attach it to any conveniently located bolt or screw to the body. it may be to your advantage to do this on all the rear lights assembly.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.
2helpful
4answers

Turn signals not working --- 2001 Cherokee Limited

Check the flasher under the dash to the left of the steering column. It's got about 8 or 10 wires plugged into it.
Not finding what you are looking for?

796 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...