MALL PGM fuse for a 2001 grand am cant find where its at

What vehicle ? year an make . BCM - body control module system .
It is the fuse that must be pulled to program the remote keyless entry, power door locks, interior lighting, and content alarm system (body control module - BCM). The fuse is located at the fuse box by the glovebox.

Your vehicle doesn't have MALL PGM fuse . What is it your trying to do ?

Your vehicle has a No MALL PGM Fuse !
2004 and up models do not have a mall pgm fuse. You'll need to take it to a GM dealer to program the remote. What is the problem you are having ?
No

check your owners manual or you could try google for the info

IMPORTANT: Before entering programming mode, have in possession all of the remotes you
will be useing on the vehicle. Once you program the remote. all previous remotes that were
programmed will be erased from memory. The other remotes will not be functional until you
program the them again.
1. Remove the key from the ignition.
2. Close all doors.
3. Remove the "MALL PGM" fuse from the fuse panel. Use the legend on the fuse panel or
owner's manual to properly locate the "MALL PGM" fuse.
4. Insert the key into the ignition, and turn to the ACC position.
5. Turn the key to OFF and then back to ACC within 1 second.
6. Open and close any vehicle door. A chime will be heard when the system enters into
programming mode.
7. Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds.
IMPORTANT: After 7 seconds, a chime may be heard confirming successful
synchronization. It is necessary to wait approximately 14 seconds for a second chime
that will confirm successful programming.
8. Repeat step 7 now for each additional remotes to be programmed including any existing
remotes.
9. Remove key from ignition.
10. Install the "MALL PGM" fuse back into the fuse panel and test remote(s).

IMPORTANT: Before entering programming mode, have in possession all of the remotes you
will be useing on the vehicle. Once you program the remote. all previous remotes that were
programmed will be erased from memory. The other remotes will not be functional until you
program the them again.
1. Remove the key from the ignition.
2. Close all doors.
3. Remove the "MALL PGM" fuse from the fuse panel. Use the legend on the fuse panel or
owner's manual to properly locate the "MALL PGM" fuse.
4. Insert the key into the ignition, and turn to the ACC position.
5. Turn the key to OFF and then back to ACC within 1 second.
6. Open and close any vehicle door. A chime will be heard when the system enters into
programming mode.
7. Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds.
IMPORTANT: After 7 seconds, a chime may be heard confirming successful
synchronization. It is necessary to wait approximately 14 seconds for a second chime
that will confirm successful programming.
8. Repeat step 7 now for each additional remotes to be programmed including any existing
remotes.
9. Remove key from ignition.
10. Install the "MALL PGM" fuse back into the fuse panel and test remote(s).

IMPORTANT: Before entering programming mode, have in possession all of the remotes you will be useing on the vehicle. Once you program the remote. all previous remotes that were programmed will be erased from memory. The other remotes will not be functional until you program the them again.


1. Remove the key from the ignition.


2. Close all doors.


3. Remove the "MALL PGM" fuse from the fuse panel. Use the legend on the fuse panel or owner's manual to properly locate the "MALL PGM" fuse.


4. Insert the key into the ignition, and turn to the ACC position.


5. Turn the key to OFF and then back to ACC within 1 second.


6. Open and close any vehicle door. A chime will be heard when the system enters into programming mode.


7. Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds.

IMPORTANT: After 7 seconds, a chime may be heard confirming successful
synchronization. It is necessary to wait approximately 14 seconds for a second chime that will confirm successful programming.


8. Repeat step 7 now for each additional remotes to be programmed including any existing remotes.


9. Remove key from ignition.


10. Install the "MALL PGM" fuse back into the fuse panel and test remote(s).


Thank you for using fixya and good luck

Where is the MALL PGM fues on a 2001 Gram Am.

I think you should go for manual first after that it will be easy for u to solve your problem. I had visited this site past 2 months before for my vehicle and find it quite helpful may be you will also get something useful here
Best Manuals