At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
How do you replace a tail lamp on a 2007 toyota avalon it appears you have to remove the bumper if that is the case how do you remove the bumper is there special tools ?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is not as easy a process as you might think. There are three nuts in the trunk behind the garnish, but the harder part is there are two bolts behind the rear bumper. You have to remove the rear floor finish plate from the trunk and then the bumper and then you will see the two bolts that hold on the taillight assembly.
you can heat the bumper heat gun ( you can rent one i think?)
this will soft the bumper so you push it out easily on the car
1. inside your trunk remove small back clips in trim panel 2. remove tail lamp four 8mm nut perside unplug wires 3. remove black clips under tail lamps ( flat head screwdriver to pull center of the clip up slowly then remove the hole clip) 4. three if the some clips are bottom if the bumper 5. three or four 10mm nuts in side the quarter panel on the right and left side 6.four s shape clips are top bumper that will pull loose 7. with some help slide bumper by pulling it off it 8. when you reinstall the bumper you may need to tape the strophereinforcement in place
×