2000 frontier. died while driving now getting no fire. wut do i do? fuses are good and fuel pump is fine. just imeditaly quit firing.

Sorry to the bearer of bad news but i have a funny feeling your ECU unit has failed ,where is it located on this vehicle anywhere near the engine where it can get hot?

check all fuses, any ground cables disconnected?

first thing i would do is compresion test if good go thru fuses and relay check all grounds

What is the fuel pressure?

first change fuel filter and check for fuel flow

Probably the fuel pump. It starts & runs until the pump gets hot, then when it quits, your car quits.

change the fuel filter, check the fuse for the sending unit and the fuel pump relay and if all these test good it maybe the pump getting weak

here is a picture, it is on the outside of the distributor.
300? 300: true ); MAX-HEIGHT: 400px; ; HEIGHT: expression(this.height > 400? 400: true )" src="http://info.rockauto.com/getimage/getimage.php?imagekey=49977&imageurl=http%3A//www.standardbrand.com/web_app/catalog/images/LX709.jpg" />

Chevy Trucks, Blazers, S10 pickup and the like will vapor lock ecspecially the 2000 models. Do not tighten the gas cap past 1 click. There is a tube that runs from the top of the tank down and this gets hot and collapses or burns in half. We just bought a reinforced rubber tube cut it to lengh and use it instead of part and it's worked grat for 2 years so far.

get a new computer box.its cheap and easy.