1992 jeep cherokee laredo fuse box diagram , signal lights and hazards don't work all of a sudden

http://www.bing.com/images/search?q=fuse+box+diagram%2C+2001+jeep+cherokee+laredo&qs=n&form=QBIR&pq=fuse+box+diagram%2C+2001+jeep+cherokee+laredo&sc=0-43&sp=-1&sk=#view=detail&id=207EEEC8503C9B57021B39A61702C062A8C1C5AE&selectedIndex=0

put it into bing, this came up.

The only thing left is the wires and the bulb socket. The problem has to be there.

What about the turn signals what happens when you use them? Please reply. Also I would check both the fuse boxes for the blown fuses, check them all. As far as I know there is not inline fuse for the a/c

If you need further help, I’m available over the phone at https://www.6ya.com/expert/edward_020b3320326d263d

Check in this link the Jeep-XJ-1990-Cherokee-Owners-Manual (spanish). Page 76 and next for FUSES.

Hope helps.

But they have different switches, right? Check the turn signal switch.

check your fuses

sounds like a blown fuse

6806

Mine just went out this past week and found the flasher/hazard fuse inside the glove compartment under the plate with the pull cord to access.The 1994 Jeep Grand Cherokee Laredo AWD part# on the fuse and called to confirm with a Jeep dealer is:
56007243 and appx. 44.00 from the dealer, may be able to get from an auto store as well.

Good luck if it is the fuse box you were looking for.

Have a look down by steering column near where diagnostic connector is.