1999 Isuzu Trooper Logo
Posted on Oct 08, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How to test the high pressure oil pump?

Good day sirs, we are from the philippines and we bought a 2nd hand isuzu trooper with a 4jx1 engine, we had the trooper for almost 4 years now, the problem was the turbo, the impeller and its shaft was broken so we had it replaced, we drive tested it and after a few kilometers on the road(6 kms) it emitted a white smoke, we towed the car and brought it home and contacted the supplier of the new turbo because it was again broken, so he came to see the car and tried starting it then he said that there was no oil coming to the turbo thats why it broke. what seems to be the problem? a mechanic told us that it could be the high pressure oil pump, but he is not sure, this pump is expensive and we dont want to be gambling our money on this considering that we have spend so much money on this vehicle, rpcv, rps, turbo, injector you name it we have changed them all. any help? thanks

3 Answers

Simon

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Expert 235 Answers
  • Posted on Oct 08, 2009
Simon
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Apr 20, 2009
Answers
235
Questions
1
Helped
141614
Points
514

If you have no oil pressure on the dash gauge you need to drop the tin sump under the engine and check the two oil pick up pipes in there . They crack and fall off or the seal goes hard letting in air so no oil pumps. An known fault on the 3.0
The long one is for the engine oil lube ( turbo ) and the short one is for the injection system .
The high pressure pump is only for the injectors.
If you have good oil pressure on the dash gauge then I agree with Guru Ronaldbrains the turbos are poor but ! its 5/30 oil in 3.0 4JX1 engine or you will have starting troubles .

Ronaldbrains

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 881 Answers
  • Posted on Oct 08, 2009
Ronaldbrains
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Sep 19, 2009
Answers
881
Questions
0
Helped
299506
Points
2375

YOU should have a oil pipe at the top and another one at the bottom of turbo ,,now these are the feed top and the return the bottom pipe.
Take off top pipe turn engine over, oil should come out.. now take off the bottom pipe and blow down it and you should hear the sound of air in side of engine If you have oil going in top and clear bottom pipe then you havent any problems ..the turbos was no good. but change oil to 20w 50.IF YOU hadent any oil pressure then the engine would have blown up at about 1mile from the start Turbo was no good to start with...

Ad

Victor Zapanta

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Welcome Back:

Visited the website for 2 consecutive days.

  • Contributor 3 Answers
  • Posted on Feb 05, 2019
Victor Zapanta
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Welcome Back:

Visited the website for 2 consecutive days.

Joined: Aug 26, 2016
Answers
3
Questions
0
Helped
9772
Points
13

Try to check the exhaust system maybe restricted, if there is no oil lubricaing the turbo that would knock out your engine too. that will warned you with oil indicator light.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
2answers

Isuzu Wizard 4JX1 does not respond to the gas pedal

Maybe the throttle body has a fault or not connected.
Check with an OBD reader for errors.
6helpful
3answers
1helpful
1answer

My Isuzu Bighorn 4JX1 RJM Engine stalled after fitting it with new oil pump. It can crank but is emits smoke but not run. What could be the problem? I have tried to check if the fuel pump is not working...

the engine oil pumps are in the rear of the engine(trans out) and behind flexplate /flywheel, were any of these 2 engine oil pumps touched if so the flywheel /flexplate has to be timed to crankshaft position, so you might have it in the wrong position, if your talking about the diesel lift pump (injector pump) that also supplies high pressure engine oil to injectors, after replacing this there is a learn procedure for the rail pressure control valve that is on pump. this can only be done by dealer or some one with Tech2 scanner tool.
0helpful
1answer

My ist experienced with my 4jx1 engine was, diesel fuel mixing wid water inside my radiator so i replaced set of O ring at nozzle, 2nd is after a month i cant start my engine until i replace RPCV sensor...

you need to replacing Injector 'O; rings properly,
we had good experience with those problems.
if u need timing pictures & Injector 'O' ring pictures i can send u.
Edirisinghe Auto Engineering(Pvt)Ltd.
Sri Lanka.
10helpful
4answers

Isuzu Trooper (Bighorn) 4JX1 Engine Common rail injection. Year of manufacture1999 We have problem with this vehicle. Refused to start for about one year. Parked in workshop that period. Sent my guys to...

Try fitting a seperate transfer pump between the tank and HP pump(quick/cheap fix only) and see if this resolves the problem. If yes check filler cap(no air lock), air leaks in supply hoses or transfer pump(and of course the usual "check the fuel filter").
If not, dig deeper:

72f3b1a.jpg
J-1-15(not indicated) : Earths glow plug relay to enable glow plug circuit.
ECM : Electronic control module
IS : Idle switch
ECT : Engine coolant temp
OTS : Oil temp sensor
IAT : Intake air temp
FTS : Fuel temp sensor
INJ : Injectors 1 through 4
RPS : Rail pressure sensor
EGR : EGR vacuum pressure
MAP : Inlet manifold pressure
APS : Accellerator position sensor
20helpful
2answers

Isuzu tropper 4jx1

You have no injection pump ,each injector does that job .
You have a faulty rail oil pressure sensor I think ,read my tips to test this sensor .
1helpful
1answer

Need torque settings for dual mass flywheel in 3.0 isuzu trooper

diesel 4JX1 engine
apply engine oil to threads
1st- 59Nm(43lb ft)
2nd- 60-90deg.
3rd- 60-90deg.

5helpful
3answers

4JX1 engine cut off while test drive after oiland filter change and not starting

That pop noise is ok just the flap in the throttle body coming open when the car stops .
The engine may have stopped because its low on oil so the oil pump for the injectors wont work - takes about 7 u.s. quarts of 5/30 fully synthetic oil at service time to run right.
It can also stop if the pressure sensor in the injector rail packs up or the oil pick up pipe for the injector system falls off due to cracking the mount .
Not finding what you are looking for?

2,796 views

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...