Just bought a 95 chrysler cirrus off a "friend" who said it was running cause it needed a crank shaft sensor or something... had a mechanic hook it up to a tester and is getting no readings and thinks it may be a computer issue... He said he has no clue? I dont have the extra cash to kkep buying parts to TRY... anyone have any suggestions?
THANKS!!
SOURCE: 1999 chrysler cirrus
Check the coil packs, or the Ignition module. Disconnect the harness to the ignition module. And test the leads to see if there is current. I don't know what the specs should be, but it will be minimal. Never overlook fuses either.
SOURCE: Where is coolant drain plug on 1996 Chrysler Cirrus?
The coolant drain plug is located on the bottom left side of the radiator when looking from front of car. To access it you must remove the passenger side fog light and push the rubber cover out of the way.
SOURCE: how to replace fuel pump on 95 chrysler cirrus
to detailed to explain here. buy a hanynes repair manual at local auto store, 17$ it'll explain step by step.
SOURCE: 1995 chrysler cirrus 2.5 has no spark
ITS NOT READING BECAUSE IT IS OBD 1 FIND A SHOP WITH A GENESIS COMPUTER THAT CAN READ OBD 1 AND 2
92 views
Usually answered in minutes!
×