- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
first mistake you make is to increase the fuse capacity to above that required. You have a short in the circuit and by putting such a large fuse in you run the very real risk of burning the wiring loom. Check the bulb sockets and check that the right bulbs are in the sockets. bulbs come in two styles. one has 2 contact points and is either for 2 filaments (stop and tail) or a earth wire (Plastic light units) and the other is a single contact that earths out through the metal base . If you have the wrong bulb in place the current will short directly across the contacts and the light will not come on and the fuse will blow. Fuses for tail lights will be 5 amp maximun
Yes you can open the tailgate from the inside,if you open the housing that holds the jack and wheel spanner then you will find the hatch to open the tail gate
at the tail lights the wire is blue, at the rear light junction block ( under the rear body about the center of the rear bumper ) the right side tail light wire is brown/white the left side tail light wire is brown, from the junction block to the tail lights both wires are blue.
×