To remove the belt, put a 1/2" drive breaker bar into the receiver on the tensioner and push the bar so it moves the tensioner counter clockwise. Remove the belt and put the new one back on following the diagram on the sticker on the car. If no sticker, before removal, draw yourself one. When putting the belt back on, get everything positioned correctly and again push the bar in the same direction as you did to remove and put the belt back on the tensioner pulley. Check that all pulleys are engaged with the belt properly, start the car and watch the belt for a few minutes checking that no pulleys are wobbling etc. and that belt is running true.
.
SOURCE: need to replace fan belt on 1997 pontiac grand am
Clockwise from crankshaft pulley, under tensioner, around alternator, over PS pump, under water pump, around A/C compressor and abck to the crankshaft pulley.
SOURCE: change and replace the cerpentine belt on pontiac
Here are the drawings for you car belt routing. You will have to see which one applies to your vehicle according to whether you have air conditioning, smog pump and so forth.
http://www.2carpros.com/car_repair_information/year/1994/make/pontiac/model/grand_am/1994_pontiac_grand_am_drive_belt_routing_diagram.htm
140 views
Usually answered in minutes!
×