At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
There are 2 different engines available for your car. Please post back with the engine size.There are 2 different engines available for your car. Please post back with the engine size.
AnonymousMar 18, 2014
Blew 100amp fuse in 2005 mazda 6Blew 100amp fuse in 2005 mazda 6
AnonymousMar 28, 2014
just a diagramjust a diagram
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Below is the master help link
provided to go through belt routing diagram:---Timing belt, drive belt,
serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all
types of car models? Click the link below: ----
Question Posted by Asker under the 1994 Mazda for a 1993 Mazda.
Click on the following: free, direct Link. It has several Diagrams including the Serpentine Belt Diagram for your 1993 Mazda 626 2.5L DOHC V6. It has the 2.0L DOHC 4-Cyl Diagrams as well as Instructional and Directional Diagrams that will help you.
Standard Rules to Removal the Serpentine Belt with a Tensioner: 1. Find the Tensioner(s). (See Diagrams on Link) 2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move. 3. Remove the loosened belt off one of the other more easily accessed Pulleys. 4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position. Standard Rules for Installing the Serpentine Belt with Tensioners: a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on. b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right. c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley. d. Using your other hand - Pull the Belt up and over the Last remaining Pulley. e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!
There are 2 different engines available for your car. Please post back with the engine size.
Blew 100amp fuse in 2005 mazda 6
just a diagram
×