Most likely two issues. For the dome light, check door switches and connectors. Spray with silicone when you take them apart.
For lighter, trace backward from lighter. The plug could well have come off at the socket.
SOURCE: 2006 Honda Accord Dome Light
lok real carefull at the lense there will bee two little slots in the lense between the cover and the trim you can use a pockett screw driver or a butter knife and pry open the lense away from the trim it well be a little stuborn but dont worry you wont crack the lense
SOURCE: inatallation 92 honda accord power steering pump
Hey, here's the procedure, disable air bag, if equipped w/ one, disconnect the pump return hose from the reservoir and place the end in a large container. Plug the port in the reservoir. Start the engine and turn the steering wheel lock to lock several times, until fluid stops running from the hose. Turn off engine immediately. Re-attach hose. Disconnect the inlet and outlet hoses at the pump. Remove the drive belt. Remove the mounting bolts/nuts and remove pump.
Install in reverse order. Adjust belt tension,fill ps reservoir and bleed any air from the system (to bleed air from system, fill reservoir, start engine and allow to idle, turn wheel from side to side all the way several times. Shut off, fill if necessary.
. Tighten bolts to : Thru bolt 30 ft lbs., mounting nut 16 ft lbs.
SOURCE: 1991 Honda Accord brake light probelm.
Check the prones inside the connector that you plug into the brake light module. You may have to squeeze, wiggle, tilt each one to see which one is not connecting all that good. I know it may sound confusing. I tried to explain the best of I could.
SOURCE: Brake lights dont work
Check if you have electrical current at brake light switch.If not go back to checking the fuses and plugs.
54 views
Usually answered in minutes!
×