Cars & Trucks Logo

Related Topics:

r
richard Posted on May 30, 2019

WHY IS INGRATOR LIGHT FOR E-BRAKE NOT COMING ON NOT BULB THEY BEEN REPLACED ON A 95 PLYMOUTH NEON

5 Related Answers

Anonymous

  • 10 Answers
  • Posted on Dec 28, 2008

SOURCE: my brake lights don't work on my 95 dodge neon

I don-t know car tech terms... But get down where the brake pedal is and you will see where the pedal hits a little switch to make the brake lights come on and go off. Get a friend to look at your brake lights while you push the switch to see if it turns on and off, if not.. It-s probably has something to do with that little switch box...

Drack
V V

Ad

Anonymous

  • 379 Answers
  • Posted on Dec 31, 2008

SOURCE: 2001 dodge neon tail lights inop

looking at your schematics and , you say tail lights don't work , you didn't mention if front parking lights and license plate lights are working , they all come from the same source , a black /yellow wire , a good clue if front work and rear don't , please advise .if fronts work then you have a open circuit somewhere between junction S118 (near breakout for left headlamp) and rear sockets.

Anonymous

  • 3 Answers
  • Posted on May 25, 2009

SOURCE: speedometer on 95 plymouth neon doesn't always work.

I have the answer!
There are two clips that the cluster connects to. Those two clips have become worn. There are two ways to resolve this. 1. replace the clips. 2. (what I did) took a sparkplug box and cut it in 4 strips long wise and folded them in half. I then inserted those strips between the dash and the clip. This pushes clip forward and creates a stable connection.

Anonymous

  • 104 Answers
  • Posted on Jun 14, 2009

SOURCE: No brake lights on 95 Suburban

Disconnect electrical connector to brake switch brake located near brake pedal. Check for twelve volts or power with a test light on one side. If power, get a piece of wire, strip the ends and plug into each end of connector. If brake lights works, switch is bad. If not, check bulbs and power in the brake light socket. If no power, check to make sure power is leaving the trafficator switch as the brake light switch is depress or bypass. Check for broken or bad connection along circuit. If all good, you could have a trafficator switch problem. Oh, are the hazard and trafficators working in the rear? If they are, the trafficator switch is bad because the brake switch sends power there, then out to the back through the left and right rear trafficator wires.

Anonymous

  • 62 Answers
  • Posted on Aug 03, 2009

SOURCE: I have a 1998 dodge neon, the rear brake/ turn not functioning

Check all the fuses.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How do I change the PRNDL bulb in a 2000 Plymouth Neon?

go full screen then find the mounting bolts to remove the cover.
finding the light should be easy
replace with the same type bulb.
reassemble.
0helpful
1answer

95 dodge neon brake lights and rear turn signal will not work,

The fast blinking is usually a bulb burned out. Replace the rear bulbs. If this is not the problem , it may be a ground issue, but it really does sound like a bulb issue. Also inspect the light socket while you are there. Look for any bad corrosion Good luck
0helpful
2answers

My brake light and signal light stopped working on my 1998 dodge neon on drivers side back can you help?

Does any lights on the right side work? It sounds like the ground connection to the assembly is loose.
1helpful
2answers

Right rear brake light and blinker dont work

when you use the right turn signal, does it blink faster?. Could it be the bulb holder is damaged or rusty?
1helpful
1answer

97 Plymouth Neon Interior Lights Turn on when Braking

CHECK ALL FOUR DOOR LIGHT PRESS IN SWITCHES FOR A LOOSE WIRE OR BROKEN.
0helpful
2answers

My brake lights don't work on my 95 dodge neon

IF BOTH DONT WORK AND THE BULBS ARE GOOD CHECK THE FUSES.
1helpful
2answers

My friends 2000 plymoth neon leaks oil...bad

the most common oil leak is the front cranshaft seal, as for the 3rd brake light replace the bulb(s)
0helpful
1answer

Left rear stop light & turn signal went out.

The wiring harness runs through the trunk between the quarter pannel and the inner liner. You might check these wires to make sure it hasn't been shorted or frayed.
Not finding what you are looking for?

42 views

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...