SOURCE: 1998 plymouth grand voyager cruise control relay/fuse location?
Check under hood in box marked fuses & relay, on drivers side and look under cover of it for I.D.
SOURCE: Need a diagram for a 1992 Plymouth Grand Voyager
Here's a link to both size motor diagrams...
V6 3.0L
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S4001
V6 3.3L
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7006
If this helps, please post feedback. Thanks
SOURCE: Needed serpentine belt diagram for a 91 ply. voyager 3.3L engine
Here's a link to the diagram you need...
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7006
Good luck and please rate this solution. Thanks.
Testimonial: "Looks good."
SOURCE: 1996 Plymouth grand voyager se-need diagram
The BCM is located on the drivers side under the the steering column. It is behind the fuses and to get to it you have to remove the bash board plastic, than a pice of metal and than you have to remove the fuses box. It will take you approximately 20 min to remove everything. Once you remove the BCM you need to take note of the Part Number P/N. It has to be the same P/N on the replacement BCM. You can use any BCM from years 1996-2000 but make sure the electrical configuration is the same as yours (Power windows, alarms, etc.). I bought my BCM on the junk yard for 35 dollars and my car works perfectly.
I hope this may have assisted you,
Tom
SOURCE: 1997 Plymouth Grand Voyager SE instrument cluster
It sounds like the connection to the cluster is not making good contact.
50 views
Usually answered in minutes!
×