2000 Pontiac Sunfire Logo

Related Topics:

A
Anonymous Posted on Apr 08, 2019

2000 Pontiac sun fire gauges go wacko when started up but,, will sometimes reset if ignition is turned on repeatedly without starting vehicle

1 Answer

hillbilly007

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 6 Answers
  • Posted on Apr 08, 2019
hillbilly007
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Aug 06, 2010
Answers
6
Questions
0
Helped
7479
Points
17

Common problem with GM they will fail sooner or later, gonna need to be replaced\rebuilt check out this product on amazon



AUTOOL X60 Car OBD GPS HUD Multi-function Digital Meter Alarm Speed Water-Temp Gauge Malfunction-Test for 12V OBD-II Standard Vehicles Automotive Display Hud

5 Related Answers

Anonymous

  • 659 Answers
  • Posted on Dec 17, 2008

SOURCE: Ford Focus 2004 - key won't turn in ignition

these vehicles have a lot of problems with ignition cylinders binding up. It needs to be replaced with an updated cylinder. If you tap on the key with a small hammer or something like it while turning the key you can get it to turn

Ad

Anonymous

  • 1861 Answers
  • Posted on Sep 12, 2009

SOURCE: 2000 Toyota Tundra starts occassionally. Sometimes

Welcome to FixYa! You need to replace the starter solenoid contacts, or the starter itself.

Note that the starter is UNDER the intake manifold. This is a VERY difficult job, and is not recommended to those who do not have sufficient automotive experience.

If you DO remove the intake, you MUST replace the intake manifold gaskets, or your engine will not run properly, due to air leaks at the intake mating surfaces.

Anonymous

  • 51 Answers
  • Posted on Jan 16, 2010

SOURCE: 2000 alero won't start. turns over and fires but wont start

make sure your cap and rotor timing is correct double check spark plug routes (mistakes happen). maybe your timing is off in general.

Anonymous

  • 1 Answer
  • Posted on Nov 06, 2010

SOURCE: my 1998 plymouth neon expresso

I was reading about the same issue and i think we will all have to get a new cluster gage or whatever
there is a way to fix it yourself if you can
using a soldering gun

Anonymous

  • 78 Answers
  • Posted on Feb 02, 2011

SOURCE: 99 pontiac sun fire theft light is on and wont

most car anti theft systems can be disabled in the following way... (aka follow the link)

DISABLE ANTI-THEFT

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2000 Pontiac sun fire shut itself down while driving and will not start at all and there are no codes

Does the engine crank when the key is turned to the start position ? Crank no start , if it does the engine needs fuel an ignition (spark) to start an run . Do you know how to test for these things ?

https://www.youtube.com/watch?v=S0Fs2i-XBKI&t=214s
0helpful
1answer

He said how to reset the security system on a 2008 Pontiac Torrent

2008 Pontiac Torrent anti theft reset
30-minute Learn Procedure
  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to start the engine, then release the key to ON. The vehicle will not start.
  3. Observe the SECURITY telltale. ...
  4. Turn OFF the ignition, and wait 5 seconds .
  5. Repeat steps 1-4 two more times for a total of 3 cycles/30 minutes . ...
  6. Start the engine.
Jun. 16, 2011

My o6 pontiac Torrent has a lock lite on dash and ignition will ...

https://www.justanswer.com > ... > Pontiac Problems Search for:
2008 Pontiac Torrent anti theft reset
0helpful
1answer

Pontiac

Hi Paul,here's how to reset your system.
  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to start the engine, then release the key to ON. The vehicle will not start.
  3. Observe the SECURITY telltale, after approximately 10 minutes the telltale will turn OFF.
  4. Turn OFF the ignition, and wait 5 seconds.
  5. Repeat steps 1 through 4 two more times for a total of 3 cycles/30 minutes. The vehicle is now ready to relearn the passwords on the next ignition switch transition from OFF to CRANK.
  6. Start the engine.
0helpful
1answer

I have a 1998 cavalier, we changed the starter twice and the ignition switch as well. The car will crank over three or four times and then the next time it acts like it wants to start it keep cranking even...

Product Safety - Ignition Circuit Thermal Events # 04002 - (02/18/2004)
04002 -- Ignition Circuit Thermal Events
1998 Buck Skylark
1998-2001 Chevrolet Cavalier
1998 Oldsmobile Achieva
1998 Pontiac Grand Am
1998-2001 Pontiac Sunfire
Due to part availability, this recall is being conducted in three phases. Phase 1 will consist of 1998-1999 vehicles, phase 2 will consist of 2000 vehicles; and phase 3 will consist of 2001 vehicles. When sufficient parts are available to notify customers of 2000 and 2001 vehicles, you will be notified and will receive a new initiation report.
Recall - Ignition Circuit DefectCondition
General Motors has decided that a defect which relates to motor vehicle safety exists in certain 1998 model year Buick Skylark; 1998-2001 model year Chevrolet Cavalier; 1998 model year Oldsmobile Achieva; 1998 model year Pontiac Grand Am; and 1998-2001 model year Pontiac Sunfire vehicles. If the engine fails to start and the driver holds the key in the "start" position for an extended period, high current flows through the ignition switch, and sometimes produces enough heat to melt internal switch parts. If the switch is damaged, a fire could occur in the steering column, even with the engine off and the key removed. The fire could spread to the interior of the car, which could injure occupants of the car or cause damage to adjoining structures.
Correction
0helpful
1answer

Reset change engine oil light

to reset the change oil light first you turn the ignition on without starting the vehicle wait till all buzzers stop then you depress the excellerator pedal three times and release now start the vehicle the light should be reset. its goofy I almost couldn't believe it when I read it in the manual but it does work.
12helpful
2answers

How reset oil light 2009 pontiac wave g3

Turn on the ignition with engine off.
Fully press and release the accelerator pedal 3 times within 5 seconds
Turn off the ignition

It is in sections 3 and 5 of the owners manual if you ever need to refresh this next time.
2helpful
1answer

Oil change light is on how can i turn it off

  1. Turn the ignition key to ON (with engine OFF).
  2. Push the accelerator pedal fully to the floor and release three times within five seconds.
    • The CHANGE ENGINE OIL light should flash.
  1. Turn the ignition OFF, then start the vehicle.
    • If the CHANGE ENGINE OIL message comes back on, the monitor has not reset. Repeat the procedure.
1helpful
1answer

Got a stuck key out of the ignition, but it activated theft deterrent system, unhooked the battery cables for a while and rehooked back up. system did not reset. is there a way to reset it without taking...

If the ignition lock has not been damaged, ( that's where the GM Passlock system reads the ignition key) here is how you reset the Passlock to youe keys.

Ignition keys relearn takes about 30 min to do. 30-Minute Learn Procedure 1. Turn ON the ignition, with the engine OFF. 2. Attempt to start the engine, then release the key to ON; the vehicle will not start. 3. Observe the SECURITY tell tale light. After approximately 10 minutes, the light will turn OFF. 4. Turn OFF the ignition switch, and wait 5 seconds. 5. Repeat steps 1 through 4 - two more times - for a total of 3 cycles of 10 minutes. 3x10 = 30 minutes. The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch turn from OFF to CRANK Important: Turn the Ignition Switch OFF. The vehicle learns the Passlock Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle. 6. Start the engine. The vehicle has now learned the Passlock Sensor Data Code and/or password. 7. With a scan tool, clear any DTCs if needed. History DTCs will self clear after 100 ignition cycles. Without a scan tool you may have momentary starter interruptions while history clears itself.

Good luck and keep me posted, be glad to know you got your car running again.
2helpful
1answer

Dash goes dead and sometimes the truck fires & stalls quickly.

GM is known for faulty ignition switch on that model.
Not finding what you are looking for?

98 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...