Lift front of vehicle secure jack stands remove right front wheel strut mount bolts ,outer tie rod end ,remove speed sensor for movement of spindle remove axle nut swing spindle away and feed axle from hub remove carrier bearing mounted at block pull axle out reinstall in reverse order torque axle nut to 105ftlbs
SOURCE: 2003 Santa fe timing belt change
You can drive it till it breaks of course, that will cost much more then replacing it as maintenance though. I would plan to have it changed much sooner then later as you are already past your recomended service time.
SOURCE: Fog Light Replacement Hyundai Santa Fe
The above statement is GREAT!!! The wheel-well piece folds down across the area you need to be in. There are 2 screws to undo this part. Push it back and there is a cap that unscrews which holds the wires and socket he is talking about. Unscrew the cap, unscrew the wire and housing. The bulb comes out. You pull the wire harness off and install the new bulb. It has a triangular push-in and it has to go just right so take note of how it comes out. Also, being a halogen light bulb, do not touch the bulb with your hands - the oils will make it explode.
SOURCE: front pass side cv axle removal on 2003 hyundai santa fe
pull swiftly !!! on the axle hub
as its got a big circlip in there & that is why it feels STUCK!
Cheers Rob
SOURCE: Change serpentine belt 2004 Hyundai Santa Fe
it uses a spring loaded tensioner.use a breaker bar to rotate the tension and it should just come off.if u need a pic or anything else to do it let me know,
246 views
Usually answered in minutes!
×