Replace the Batteries. Until then, touch the remote to your Chin, when looking for, or approaching the Car. This will turn your head, into an Antenna Extension, and extend the Range, you may Signal the Car.
SOURCE: need new keychain alarm button for 1996 ford explorer
ebay. match part number on back of fob. follow instructions in owner manual to program.
SOURCE: after installing a new battery on my 2003 Ford
If you have the keypad on the door, enter your Security numbers and then try starting it. We have had a number of reports of this problem from Ford, Lincoln, and Mercury owners.
Although you said it is a "NEW" battery, many times the batteries sit in the store and are not fully charged. You can try jumper cables and disconnect the NEG cable of your car. Let the assisting car charge your new battery with the jumper cables. Then disconnect the jumpers and reconnect your NEG cable and try to start it.
If it still will not start you may have to use the jumpers and use both batteries to turn your car over.
There seems to be something in the Alarm system that drops the Starter voltage when this happens.
SOURCE: 1998 ford explorer alarm will not let car start
The Security system will activate if the Battery is below standards. Have the battery checked. Even if you jump start it, as soon as the jumpers are removed the charging system may not work or the engine may die.
If you have another ignition key, try that. The ignition key has a Code in it and if it does not match the Codereader, it will not start.
SOURCE: My alarm went off when I used my auto start to
fords have pats passive anti theft system i haveny found a reset normally you have to take them to a dealer and have them reprogramed
99 views
Usually answered in minutes!
×