At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
https://www.engine-codes.com > p1120_ford
Malfunction is detected when voltage from the sensor is sent to Engine Control Module (ECM) is out of range. 'What are P1120 FORD code possible symptoms? Engine ...
You'll have to figure out if it is a fuel or ignition problem. Is the check engine light on ? Have you checked for trouble codes ? It could be a relay, the ignition module, coil, fuel pump, or a list of other things.
I wouldn't expect a professional to replace all you mentioned,so did you just throw parts at it yourself and why?
Other than a MIL Lamp and one code,what are the issues?
Ford has mounted these in 2 different areas. 1. Under the dash, either pass side or divers side. 2, Or in the engine compartment located next to the Power Dist Box,, Black in color. If you can not find the location call your Ford Dealer, or a Chiltons Manual should have the location
4.6 V8. Its on the passenger side, front of the engine. You'll need to remove the AC Compressor to get to it, it's a black sensor, with one bolt holding it in place, with 2 wires comming off of it. Its right behind the AC Compressor
×