2005 Mitsubishi Outlander Logo

Related Topics:

J
John Stewart Porritt Posted on Oct 27, 2016

Both interior turning lights flas on my mitsubshi outlander 2005 work. Single on either side ok just both flash inside

2 Related Answers

Anonymous

  • 855 Answers
  • Posted on Jul 09, 2010

SOURCE: My 2005 Outlander won't start. It turns over, but

The first step you have to take is to determine if you have an ignition or fuel problem. You must do this to know which direction in testing to go. After you find out which problem you have check your fuses and fuse links with a test light to make sure all circuits are working from that point. After that depending on your confidence in dianognostics and experience in auto repairs you may want to take the car to a shop or let us know the results that you get from the checks then we can guide you on which tests to run next.

Ad
A

Anonymous

  • Posted on Aug 04, 2011

SOURCE: cant find sparkplugs on mitsubshi

Not familar with your engine, but we get a lot of
those questions everyday

The answer is: you either never looked very hard
or have no idea that half of all vehicles today are hemi
head engines & the spark plugs are under the
individual coils,you have to remove first, to get to
the spark plugs.

Not a car person since you were a teen,then I
understand,you haven't keep up with technology

When I see problem with 2006 Mitsu I have no idea
how that got there

This is an open social web site or forum,at home, don't
get paid,don't know anymore than you do, about this site

So what problems if any are you having?
Changing spark plugs won't fix much
They get changed every 3 years or 60,000 miles in the motor

I would guess you have 100,000 miles by now, so the front
O2 Sensors should be changed also

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

2005 mitsubishi outlander indicators working correctly but both interior dash indicator lights flashing on left or right switch or circut board ?

One of the contacts for the turn signal bulbs inside the instrument clusters is loose and may need resoldering. You will need to open up the cluster and check for continuity from the turn signal LED bulbs to the electrical connector plug. In our case, we found an open circuit.
Follow this procedure to troubleshoot this problem.
  1. Remove instrument cluster from the dashboard.
  2. Open the instrument cluster. Remove the back cover from the instrument cluster.
  3. Once the circuit board is exposed inspect the contact where the turn signal sockets are connected to the circuit board. In our case one of the turn signal socket pins was broken and not making contact with the circuit.
For the more details visit the link:
https://www.youcanic.com/solution/both-turn-signal-arrows-flash-instrument-cluster-mitsubishi
0helpful
1answer

2005 X-Trail interior lighting diagram

If you open other doors besides the driver door do the lights work? If so the door ajar switch is defective in the driver door. Also can you turn on the interior lights from the headlight switch control?
0helpful
1answer

2005 chevy trailblazer interior lights don't work help me troubleshoot the issue

Most times it is the light switch when none of the lights work. Can you manually turn them on? This over rides the BCM. Interior lights are controlled by the BCM. Try opening the passenger side door, see if they come on. If so, replace the drivers door latch, inside the door. If still no lights. The BCM needs scanned for codes.
2helpful
1answer

Where is 2005 rendezvous dashboard lights and interior lights fuse?

Check the fuse box on the right (passenger) side of the center console. You should be able to identify which fuse it is by checking in the owner's manual.
2helpful
1answer

No me acelera la mitsubshi outlander

buenas tengo una mitsubishi outtlander 2004 prende pero no acelera , le cambie el acelerador electronico y la camioneta sigue igual , su ecu esta bien y el escaner dice todo correcto , quien me puede ayudar se lo agradeceria....
1helpful
1answer

Dome light is out on 2005 CR-V.

Take a look at both the door switch and the dome light switch.

Jiggle the switch on the passenger's door and see if the interior light
flashes. Spray some silicone in it if it's sticking. Single phillips
screw will remove it if you want to look at how simple the mechanism is.
0helpful
1answer

My S40 2005 has 4 rear parking lights (two in each side). My left side was out. I took all 4 bulbs and they are perfectly ok. I can make 2 bulb at a time (same side or one in each side) to work but not...

somtimes bulbs will flash(burn up the gases inside) u may see some blackaning on the inside of the bulb ,somtimes not but the filement will still be intact. replace the bulbs and see what happens.
5helpful
3answers

2005 nisson altima interior lights not functioning

Hopefully you've gotten your car fixed by now, but mine just did the same thing today 4/25/2010. While changing the dome light, I blew the 10 amp 'Batt Saver' fuse located inside the car driver side fuse area. The mini fuses in the interior are nearly impossible to check if they are blown without a tester. I bought a cheap one for $5 at AutoZone and discovered. Once replaced, all worked fine. Hope this helps someone else with the same problem I had today.
0helpful
1answer

Driver's door won't open

The problem is the door latch, you can use sawsall to cut the door stricker off this way you can open the door and replace the latch
Not finding what you are looking for?

81 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...