How do i make repair for this code P0758 - Cars & Trucks

Complete list of codes on link below
http://www.totalcardiagnostics.com/support/Knowledgebase/Article/View/21/0/genericmanufacturer-obd2-codes-and-their-meanings

P0758 - shift solenoid B electrical. I don't know for certain but I guess it is buried inside the transmission and there is probably something electrically wrong with it or the circuit.

I suggest you take advice from a specialist.

This is from Repair Pal...just Google your code (P0758) to find other helpful suggestions

OBD-II Code P0758 is defined as a Shift Solenoid B Electrical The purpose of the automatic transmission is to match the engine's optimum power and torque characteristics to the driver's desired rate of acceleration and speed by auto-selecting different gear ratios or 'speeds' to power the wheels. Shift solenoid B enables the transmission to shift from 2nd gear to 3rd gear. It does this by re-directing the flow of the transmission fluid which changes the position of the shift valves in the valve body.
When the code P0758 is set in the Powertrain Computer, it means that the Powertrain Computer or PCM is not seeing the specified rpm change that occurs during a shift from 2nd gear to 3rd gear. It's also not seeing the correct increase in road speed from the vehicle speed sensor.

P0758 Symptoms

• Check Engine Light will illuminate
• Vehicle will not shift from 2nd gear to 3rd gear properly
• Decrease in fuel economy
• In unusual cases, there are no adverse conditions noticed by the driver
• In some cases, there may be performance problems and possibly misfire-like symptoms

Common Problems That Trigger the P0758 Code

• Defective Shift Solenoid
• Defective Shift Solenoid wiring or connector
• Defective Valve Body
• Dirty transmission fluid that restricts the hydraulic passages

Those P codes are saying there is a problem inside the transmission. This is not something that you can repair or replace parts on yourself. IT is a messy time consuming job,

P0758 Chevrolet P0758 Chevrolet - 2-3 Shift Solenoid Circuit Electrical
Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty 2-3 Shift Solenoid Valve
- 2-3 Shift Solenoid Valve harness or connectors
- 2-3 Shift Solenoid Valve circuit is open or shorted
What does this mean? When is the code detected?
When the Powertrain Control Module (PCM) detects a continuous open, short to ground or short to power in the 2-3 Shift Solenoid (SS) valve circuit, then DTC P0758 sets.
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission will not shift gears
P0758 Chevrolet Description
The 2-3 Shift Solenoid (SS) valve controls the fluid flow acting on the 2-3 shift valves. The 2-3 SS valve is a normally-open exhaust valve that is used with the 1-2 SS valve in order to allow four different shifting combinations. The solenoid attaches to the control valve body within the transmission. The Powertrain Control Module (PCM) controls the solenoid by providing the ground path.

Read more: http://engine-codes.com/p0758_chevrolet.html#ixzz3kcwzXFmK

p0758 is ; shift solenoid B electrical (transmission code)

those are all codes for the shift solenoids in the transmission. very easy to get at.

The P0756 means Shift Solenoid "B" Performance or Stuck Off, and the P0758 means Shift Solenoid "B" Electrical. What you should do is clear the fault code with your tech 2, If the code still on, I think you should take your car to car repair shop.

The fault code "P0758" means "Shift Solenoid "B" Electrical.

________________
autocom cdp pro for truck

P0758 code is shift solenoid B electrical /2-3 shift solenoid circuit electrical, It better to inspect the wire going into the transmission they have a tendency to leak transmission fluid into the circuit make inspection for proper connection if you decide to replace the solenoid you still need to inspect the circuit for proper mating. If this solenoid fails and you wait to long to replace it you can loose the ECM due to the high power draw it takes from the ECM.