What vehicles will interchange with a 2000 stratus

The front driveline (also known as the front driveshaft) interchangeability between different vehicle models and years can be quite specific and depends on several factors, including the drivetrain configuration, engine, transmission, and any modifications made to the vehicles. In this case, you're asking about a front driveline from a 2004 Chevrolet Avalanche and its compatibility with a 2000 Chevrolet Silverado.
Here are some considerations:

1. Drivetrain Configuration: The compatibility of the front driveline between these two vehicles depends on the specific drivetrain configuration of each vehicle. Chevrolet offers various drivetrain options, including two-wheel drive (2WD) and four-wheel drive (4WD) versions. It's crucial to ensure that both the Avalanche and Silverado have the same drivetrain configuration (e.g., both 4WD or both 2WD) for any parts interchangeability to be feasible.
2. Model Specifics: Even within the same model year, there can be variations in driveline components based on factors such as engine size, cab style, and bed length. These variations can affect the length and specifications of the front driveline.
3. Measurements and Compatibility: To determine if the front driveline from a 2004 Avalanche is interchangeable with a 2000 Silverado, you'll need to compare various measurements, including the length and spline count of the driveline. Additionally, you should inspect the mounting points and connection mechanisms to ensure compatibility.
4. Modifications: If either vehicle has been modified or undergone aftermarket changes, such as lift kits or other drivetrain alterations, this can further complicate interchangeability.

To get a definitive answer on whether the front driveline from a 2004 Avalanche will interchange with a 2000 Silverado, I recommend the following steps:

1. Consult a Mechanic: Speak with a qualified mechanic or automotive specialist who can inspect both vehicles and determine if the drivelines are compatible. They can also consider any necessary modifications or adaptations.
2. Check with Auto Parts Retailers: Contact auto parts retailers or salvage yards with expertise in vehicle components. They may have databases or resources to confirm compatibility based on vehicle specifics.
3. Refer to Vehicle Manuals: Consult the owner's manuals or repair manuals for both vehicles, as they may provide information on driveline compatibility or specifications.

Remember that when it comes to critical components like the driveline, safety and proper functionality are paramount. If there is any uncertainty about compatibility, it's advisable to consult with experts and use genuine or compatible replacement parts to ensure the safe operation of the vehicle.

Go to www.car-part.com it has a built in Hollander interchange and will bring up all available interchanes.

the engine probly came from a diff. type of vehicle. the sensors are probly the same. i would double check my starter and alternator connections. if your talking about connecting the battery cables, if theres just a little spark when you touch the ground to the battery with the positive connected, i would say thats normal. you can, by process of elimination, you could unplug suspected components and see if this will isolate the problem if you are getting a big spark. also the engine wiring may not be causing the problem. make sure every thing in the car is turned off when checking, like dome lights and such. you can also pull diff. fuses to see if any of those circuits are causing the problem. make sure you hae a good engine ground.

Looks like it only fits a 2004 model.

yes. call a junkyard and ask them if they have one to fit. they will look up an interchange number for it and find one on another vehicle in their yard. or you can look for a new or rebuilt one on autozone and/or advance website, there will be a part number and a listing of the other applications for it. so with a little work on your part you can find many other vehicles which use this same part.

There is a spring loaded tensioner on the belt line. You can put a wrrench or socket, usually 15mm, on the bolt and put pressure to turn the tensioner. Then carefully remove the belt from the pulley and gently allow the tensioner to release. When re-installing it. be very careful not to have your fingers under the belt, there is a large amount of pressure on the pulley.

The vehicle speed sensor is located in the transmission extension housing under the vehicle..
Sorry i have no diagrams but its right next to the motor and transmission separation area .

The answer to this question is No. The 2 vehicles are different body styles and the parts will not interchange.

mcdevito75 here, It could be the air idle valve or motor, Best Bet while that check engine light is on, have your auto repair shop take a scan of your vehicles computer and sensors.

the most likely problem is a bad "vehicle speed sensor", the speedo is electric and not cable driven, it also could be why the vehicle is in 2nd! (limp mode). good luck, marty