Looking for the plug in harness for a Nitro bmwx 33.2 where can I get 8th?

You have two fans, one to cool the radiator, and one to heat the cabin.

https://www.google.com/search?q=2008+Dodge+Nitro.+How+to+remove+grey+plug+for+resistor+in+fan+shroud

..

Look at youtube

Knock sensor location on Dodge grand Caravan 3.6

Nacho, Coils are not normally replaced when changing spark plugs. Use the factory recommended plugs(OEM) . Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
http://www.nitroforumz.com/threads/changing-spark-plugs.30635
Changing Nitro Plugs 3 7 4 0L
how to change spark plugs in dodge nitro
More Information for NGK 6987

Assuming you do not have factory tweeters then either is acceptable. Use whichever is easier to get to...door speakers if mounting tweeters on door or cd player if mounting on dash.

The metal tube from the intake going behind the engine is going to the EGR Valve.


http://www.allpar.com/images/engines/4-V6-2.jpg

2007 Dodge Nitro Service Repair Workshop Manual Download


for better result of your problem click this link

Take A Of The Top Off,Is It Plastic?

Wiring is simple, red wire is hot and black is ground.Looking at the front of the plug, the inside center terminal of the plug is + the outside of the terminal is -.


Please take a moment and rate my answer.............Thanks

well :no bus: means that the infomation panell is not getting a signal check the harness below the odometer. I guess the car is running fine, if not then its the ecu itself.

They want that much because they have to replace the valance and paint it, the one with fog lights has a special brackets for them, Check to see if there is a nut on the back side of the fog light if there is you can just remove it, the fog lamps cost $110.00 each so thats 220 dollars and they use a special light switch that costs $60.00 thats why it's so much, plus have to wire it in if the Dodge did not come with the lights it may not have the wires for the harness to run the lights. So you will have to run a new relay intothe relay box switch and wires and a fuse to do it, even if you buy the factory lights and add a switch and relay your talking about $300.00