I have a 2006 rear wheel drive Kia Sorento with the following codes. P0716, p0705, p0721 and shifting issues. Falls out of reverse and gets stuck in 4th I think. I purchased a transmission input sensor (turbine speed sensor) but I cannot find its location on the rear wheel drive version of my car.

SOURCE: input/turbine speed sensor circuit

Your speed sensor, is located on top of the transaxle, near the starter. To access it, remove the battery, then remove the battery tray (4 10mm bolts). You will see wires coming from the lower oxygen sensor, and they snap into the bracket that holds the speed sensor in place. The actual speed sensor has a 2 wire clip on it, and is held in place by the bracket and a 10mm bolt.

SOURCE: I have a code p0715, which is the input turbine speed sensor

The input/turbine speed sensor has nothing to do with the turbo. It is transmission related and is a circuit malfunction. I am having the same problem and it causes my car to downshift into 3rd gear (computer's fail safe gear) on the highway. The sensor is located above the transmission housing, and doesn't require you to take apart the tranny. I am having trouble finding the part number for this and where to buy it. Any help would be nice.

SOURCE: I have epica 2006 automatic transmission

need to change gear senstior only and it easy to change

SOURCE: P0705 Transmission range sensor circuit

The sensor should be located where the shifter cable is attached to the trans. It will have a plug with several wires. Usually there will be a way to align it, like a hole with a pin when it should be in neutral.

SOURCE: 2001 Hyundai Santa Fe - Engine Code P1602, stuck in gear

Im having the same problem with my 02 Santa Fe. How do i go about fixing this problem? And is it costly? Please help