At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How do I remove front dash on 2000 Ford Windstar
That is a big job.......the radio,hvac controls, all trim,instrument cluster and all the electrical connectors to the main wire harness all has to be removed and the steering assembly dropped down.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The12Volthttps://www.the12volt.com > installbay > stereodetail
2000 Ford Windstar Stereo Wiring. Constant 12V+, Green/Purple. Switched 12V+, Yellow/Black. Ground, Black/Light Green. Illumination, Green.
Front Speakers: 6" x 8" Doors
Left Front (+): Orange/Light Green
Rear Speakers: 6" x 8" Side Panels
Right Front (+): White/Light Green
Remove the stereo with the special tools for ford radios. Remove the cup holder/ash tray. There is two screws in each of the two openings. Remove all four screws and bezel will snap out.
remove the neg battery terminal.
remove the positive lead from the starter.
remove the trigger lead.
remove the mounting bolts (2 in front and one behind the solinoid.
There is a ford radio removal tool. It looks like a pair of horse shoes most times. Or you can insert four 8 common D finish nails in the four holes (or 4 six D finish nails) -one in each hole until you feel it click. Be gentile. simultaneously push each side towards their respective front door and gently pull the radio out.
check the front blend door actuator if it is working.The actuator may be working but the blend door is broken stuck.remove the dash console panel [ac heater panel and radio] you can see the door actuator.remove the 3 screws and pullout the actuator using flat screwdriver try to rotate the door
This problem is caused by a defective Air Temperature control blend door actuator motor deep inside the dash, to replace this part u must remove the dash.
Check your fuses under hood and on dash. Some of these use two different fuses for rt. & lt. Look in you owners manual for the correct fuses to check. If it is a fuse problem, you will have to find out why the fuse was blown. Good luck
×