Serpentine belt diagram for 2004 lincoln towncar

old marine

• 2426 Answers
• Posted on May 11, 2009

SOURCE: need routing diagram for 2000 lincoln town car serpentine belt

There's a diagram at this link.

SOURCE: Installing serpentine belt for 2000 Lincoln Continental

Item Part Number Description 1 10300 Generator 2 8509 Water Pump Pulley 3 8678 Belt Idler Pulley 4 6B209 Drive Belt Tensioner 5 3A674 Power Steering Pump 6 8620 Drive Belt 7 19703 A/C Compressor 8 6312 Crankshaft Pulley

SOURCE: exploded diagram 95 lincoln town car 4.6l

If your talking about the heater pipe and hose under the intake....(to ease removal you can remove the inlet air cowl/wipers/etc.) remove upper intake/coils/fuel line etc. the tube is bolted to the back of the RT head...replace the entire tube/hose assemble....IF the tube at the frt of the block is corroded/damaged/etc. you will need to replace that also (remove waterpump for access and installation)...change you T/Stat at this time also....hope this helped you...GL

SOURCE: Need Diagram for 2003 Lincoln Aviator Serpentine Belt

There are 2 possible diagrams depending on if you have a 4.6L SOHC or a 4.6L DOHC. This information should be on the plate under the hood. Best of luck!
Greg

4.6L SOHC




4.6L DOHC

SOURCE: i need a diagram to replace serpentine belt on a

My sincere apologies for the delayed response.
I am personally going back to answer - unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!

http://www.2carpros.com/car_repair_information/year/1998/make/lincoln/model/continental/1998_lincoln_continental_drive_belt_routing_diagram.htm