Passcode bluetooth pairing

Hi
Normally when you try and connect or pair your device it normally ask for code. mostly its 0000 or 1234

thanks

Turn iPhone Bluetooth On:First you want to make sure that Bluetooth is functioning on your iPhone. Click on the Settings icon from the iPhone desktop. From the settings screen click General to show the iPhone General Settings as displayed in the below image. Notice you can see if Bluetooth is on or off from this screen. General Settings screen you can click on Bluetooth to configure the Bluetooth settings. On the Bluetooth screen shown below click to the left of Off to turn Bluetooth On.

1. Begin Uconnect Setup:Now that Bluetooth is operational on the iPhone you can start the Uconnect process. Click the Uconnect button on the rear view mirror to begin. The voice from the Uconnect system will ask you to verbally select one of the options from the menu. Once Uconnect asks for your input say "Setup" to begin the process of syncing the iPhone.
2. Start Phone Pairing:Once you say setup in the above step the Uconnect system will list numerous options available from the setup menu. One of these options is "Phone Pairing" so when the Uconnect system asks for the choices from the setup menu say "Phone Pairing".
3. Pair a Phone:In the Phone Pairing menu you can modify current entries or begin pairing a new phone. After Uconnect lists all of the choices you should say "Pair a Phone" to begin the process of pairing the iPhone.
4. Uconnect Pin Code:The first step in pairing a phone is setting the Bluetooth Pin Code that authorizes that phone to pair with the Uconnect system. When asked for the Pin Code say any four digit combination such as "1 - 2 - 3 - 4". Uconnect will repeat back the Pin Code so you can verify it has recorded properly.
5. Connect iPhone To Uconnect:After you have set the Pin Code for the Uconnect system you need to view the iPhone's Bluetooth Settings screen which you can get to following the steps in Step 1 above. Before the Uconnect system shows up in Bluetooth the Bluetooth Settings screen will look similar to the below where you may have other Bluetooth devices showing or not.After a couple seconds the Uconnect system will display as "Hands Free" as shown in the below image. Notice it states that it is not yet paired,,,,,
6. Click on the Hands Free device showing in the Bluetooth devices list above. This will open a new screen as shown in the below image that prompts you for the Pin Code you specified in Step 5.
   
   Enter the Pin Code and then click the Connect button in the top right corner of the above window. This will pair the iPhone with Uconnect and take you back to the Bluetooth devices screen where the Uconnect Hands Free device will now show Connected as shown in the below image.
   
   After the device is connected you will be prompted by the Uconnect voice again so proceed to the below steps.
7. Phone Name & Priority: After connecting the iPhone you will then name the phone and set a priority between one and seven. Name the phone anything you would like and if this is your primary phone set the priority to one so this phone always connects at a higher priority than any other phone.
8. Verify & Test:Now have a friend dial your cell phone while you are in your car to see if the music volume lowers and the Uconnect voice tells you there is an incoming call from a certain number. To make calls you can press the Uconnect button and follow the voice prompts.
The Uconnect system is a great way to safely use your cell phone in the car.

About 4,890,000 results (0.54 seconds) Search Results

How to Fix Bluetooth Pairing Problems - Techlicious

www.techlicious.com/how-to/how-to-fix-bluetooth-pairing-problems/
Dec 29, 2015 - Determine which pairing process your device employs. ... Let's say you want to pair your phone with your car's infotainment system so you ..... If your tabletdoesn't come with built-in Bluetooth (and it looks like most, if not all, ...

How to Fix Bluetooth Pairing Problems - Techlicious

www.techlicious.com/how-to/how-to-fix-bluetooth-pairing...-/CP2/
Dec 29, 2015 - Let's say you want to pair your phone with your car's infotainment system so you can .... i factory reset my tablet and now it wont find my bluetoothspeaker to pair! .... It doesn't look like you can revert to the previous firmware ...

Bluetooth FAQ for Windows Phone ' Windows Phone How ...

www.windowsphone.com/en-us/how-to/.../bluetooth-faq

Windows PhoneRead the Bluetooth FAQ for Windows Phone and get answers to common ... You can pair your phone with a variety of devices that use Bluetooth, such as the hands-free system in your car, headsets, speakers, ... Where can I find it? .... ?My phone doesn't reconnect to the Bluetooth hands-free system when I get in my car.

iPhone 6 not connecting to car Bluetooth ' Apple Support Commu

To use your Bluetooth® wireless technology enabled phone in your vehicle, an initial one-time-only pairing procedure is required. To pair your phone, initiate Bluetooth® search mode in the vehicle. Then depending on the handset, initiate search mode or discoverable mode.* Once the vehicle finds the handset, a Bluetooth passkey is required to complete the pairing procedure.

You may choose any combination of 4 to 16 digits. Enter the passkey on the phone or vehicle, as prompted, and then the other device will ask you to verify it.

If it really is a 2006 or earlier year 335i Coup?, you need the vehicle's Owner's Manual. Since: "Vehicles require a fixed Bluetooth passkey for verification which is included in the vehicle's Owner's Manual."

You can obtain the manual from the dealer, when you provide them with your vehicles VIN-code, for a price of course.

From the BMW USA site:
Bluetooth FAQs

Hi Douglas.

1. Switch on BlueTooth on your keyboard.
2. Enable BlueTooth on your iPad.
3. Search for devices on your iPad.
4. Press button if available on keyboard to get discovered.
5. Select keyboard when shown in devices list.
6. Enter pairing code sometimes 0000 or 1234.
7. Use and enjoy.

Hope this helps!

Here is the Apple site instructions:
Using Bluetooth headsets and keyboards with iPad

Here is another that explains how to do it on a MAC, might give you some clues as well:
Bluetooth How to set up your Apple Wireless Keyboard

Here is a good independent site, maybe start here:
iPad How to pair connect any bluetooth keyboard

If you prefer to watch how to do it on YouTube:
How to Connect Pair Bluetooth Wireless Keyboard to your iPad

if its a factory installed bluetooth go back to the dealership and ask them. chances are they have the factory reset codes on file for you.

Turn on bluetooth on phone.
- settings-bluetooth > on
Turn on bluetooth in car stereo
- Turn on radio, press Menu.- Scroll with knob to Phone. - Press knob to Select.- Turn knob to select Pair.
Back to Phone
- Hit the Scan button to search for BMW bluetooth- Find BMW Bluetooth name on phone and select Pair. - If should ask for a passcode, enter identical pass codes on stereo and phone.

Did you try just pressing enter (no code)? If not, try "0000" I found something here: http://fordfcsd.wunderman.be/UK/Audio%20-%20Multimedia%20-%20Navigation/Bluetooth%20%26%20Voice%20control/bluetooth%20%26%20voice%20control%20%28cg3504en%29%2001-2006.pdf which indicates "0000" is the code, but enter should do it

Hi,

If you got an owner's manual with the X, check page 172 for "clearing the system".

If not, the manual says to Press and releas the top of the TALK/BACK button. After the beep, say "System." The HFL will respond is, "System options are setup and clear." Press and release the "TALK/BACK button. After the beep, say "Clear." This process will clear all paired phones, all phonebook entries , and clear the passcode. Is this what you would like to do?" Press and release the TALK/BACK button. After the beep, say "Yes." The HFL will respond "Preparing to clear all paired phones, all phonebook entries, and the passcode. This may take up to 2 minutes to complete." Press and release the TALK/BACK button. After the beep, say "OK" to proceed or say "go back" or "Cancel. If you say "OK," after a short period of time, the HFL response is, "System has been cleared. Returning to the main menu."

Good luck.

I erased all information on my old phone and re-entered new info. Very simple.