20 Most Recent 2005 BMW X5 Questions & Answers

https://youtu.be/hX4ASwNbVdw

Starter solenoid. Put a new starter on it and try it out.

https://www.google.com/?gws_rd=ssl#q=Location+of+fuel+pump+relay+on+bmw+x5+2005+BMW+X5 Hope this helps

Fix your car right away by clicking the link I attached 2005 BMW X5

Please ihave 2009 x5 bmw code number 5f9a control time fault lifting what I doing thank you

The problem is that you have a rolling code opener. The code is randomly generated so there is no way for the car to read/learn that.

Looks like the motor / actuator is not working. It could be weather related as its very cold. it may be water contaminated and frozen the mechanism.

try here https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwj2_pCo1v_XAhUHLsAKHVW9B_4QFggpMAA&url=http%3A%2F%2Fwww.bimmerforums.co.uk%2Fforum%2F&usg=AOvVaw3-EqoWOPdnHw-lE2XybejZ

The front air spring is leaking or the line or the connector. You can locate the leak by spraying with water/ detergent mix and watching for bubbling at the leak.

You will most likely need to pull the fuel tank out and replace the fuel module.

do not bother repairing this gearbox just fit a manual gearbox with a clutch and you will have no more problems

IT SOUNDS LIKE IT MIGHT BE ALARM RELATED TRY RESETTING ALARM

Late to the party but, try pulling the fuse, number 6 or 7 I believe but check, from the box under the glove box. Leave out for a few minutes and try again. if not, check all contacts of modules in the boot cubby hole and check for water ingress. can get a little more involved if you have the dsp.

If an automatic transmission make sure it is fully in the Park position.