Location of airbag module

The airbag is not fused externally, the fuse is on the PCB in the air bag monitor module.

check fuses and relays their are different locations for air bag sensors and their is also seat belt sensors and seat switches [check the connections under the seat ]---their are sensors under the front bumper behind the valance by the radiator support also if air bag curtains passenger side between inner fender, door and door pillar the following links have information or what to look for and assist in solving your problem the recall doesn't cover your vehicle but it pertained to the passenger air bag problem as well as the 05 posting
Why is my airbag light on 2005 Hyundai Elantra Air Bags Frontal Sensor Control Module Problems More than 280 000 Hyundai Elantras Recalled Over Air Bag Problems

you need to get in touch with toyota they had a recall on your vehicle due to airbag.THE STEERING COLUMN ASSEMBLY CONTAINS ELECTRICAL CONNECTIONS TO THE DRIVER'S AIRBAG MODULE HOUSED IN A SPIRAL CABLE ASSEMBLY, WHICH INCLUDES A FLEXIBLE FLAT CABLE (FFC). DUE TO THE SHAPE AND LOCATION OF THE FFC'S RETAINER, THE FFC COULD BECOME DAMAGED WHEN THE STEERING WHEEL IS TURNED.
Consequence: IF THE FFC IS DAMAGED, CONNECTIVITY TO THE DRIVER'S AIR BAG MODULE COULD BE LOST AND THE AIR BAG DEACTIVATED. THE FAILURE OF THE DRIVER'S AIR BAG TO DEPLOY IN THE EVENT OF A CRASH THAT TYPICALLY NECESSITATES DEPLOYMENT INCREASES THE RISK OF INJURY TO THE DRIVER.

Location of airbag module Mike, Air bag module is under right front seat.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
GM Saturn Airbag Air Bag Black Box EDR Event Data Recorder SDM Deployment...

Ross-Tech: VAG-COM: VW Issues

www.ross-tech.com/vag-com/vw_issues.html

2009+ Golf/GTI/Jetta and similar no communication with 46-Cent. ... 2000-2001 Golf/GTI/Jetta/Beetle Airbag System (important!) ... We have had a number of reports of Air Bag Warning Lights staying on permanently after scanning with ... the Airbagcontroller, you need to click on Airbags in the Select Control Module screen.

Airbag control module -- "no communication" - E46Fanatics

forum.e46fanatics.com > E46 BMW > General E46 Forum

Nov 30, 2010 - 19 posts - ‎8 authors
The recommendation is to get a new one & have it reprogrammed. ... Is the airbag control module a normal wear item or should I expect that it would last the .... easily shipped, and you have the scanner that can reset any faults it may come with. ... Can'tyou simply reset and see what comes back, then fix it?

jsw airbag module not communicating through VAG-COM - TDIClub Forums

https://forums.tdiclub.com/showthread.php?t=330306

Yes!!! You can replace it yourself.(Dont let others fool you into paying extra or telling you otherwise.)
-This is for pontiac grand ams 1999-2005 only.
-There are no frontal airbag impact sensors nor are there belt tensioners.
-The SRS system consists of only the (driver airbag) ,(passanger airbag),and the (airbag control module) in 1999-2005 grand ams.

If you crash/wrecked and airbags deployed you will need.
-Driver and Passanger airbags
-Airbag control module

You can buy cheap airbags from a local junkyard any year from 1999-2005 will fit.
You can also find an airbag control module for cheap at your local junk yard BUT YOU MUST FIND ONE WITH THE SAME (PART NO.) AND (SERV NO.) AS THE ONE YOUR REPLACING.The (part no.) and (serv no.) should be at top left of airbag control module.However it does (Not) have to match numbers under barcode or the numbers at the far bottom right of airbag control module.

After you get both airbags and airbag module
-Disconnect car Battery
-Replace airbags
-Replace airbag module (under passanger seat)
-Double check all connections and connect battery.

Congradulations!Your airbags should be back online.

Notes: Two torx 35 head screws hold the driver airbag, access is through two holes behind steering column.
To remove passanger airbag you have to remove glovebox it uses (7mm)screws.After you remove you will see a pair of (10mm)screws holding airbag.
To remove airbag control module First remove passanger seat 2(15mm).Then after removing you will notice a raises area kinda like a vertical bump.Take a razor blade to your carpet and cut it to explose the module underneath.
The airbag module is held by three screws depending on the year of your car it varies.Most likely 3 (10mm).

the module is located under the center console , CAUTION WHEN WORKING ON AIR BAG SYSTEM, A CERTIFIED TECH SHOULD BE THE ONLY ONE TO WORK ON SYSTEM. this will avoid false deployment or failure of system in a crash.

For the airbag light situation to be resolved you need the airbag code to be deciphered from a scantool that can read airbag codes,,If the alternator has low output it would turn on also the ABS light,If the car was flooded it is posible that the control module did short out its location in in the center bottom console

The airbag module is a serious safety device and should not be tampered with. The entire air bag system ie module , air bags, seat belt tensioners etc are treated as one unit and there fore not a serviceable item or part replacement there of. The module should be located in the bowels of the dashboard (yellow wiring ) and mounter to the bulkhead. Do NOT tamper or adjust any componants.Good luck

you need to takee into a certified mechanic , if you mess with the air bag system and it deploys no one will work on it . the cost to replace your airbag system could be easily 2500.00