Turned a big end bearing
SOURCE: hyundai elantra 1.6GLS J2 torque settings
dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
mains-30nm +65deg
big ends- 1 - 26nm 2 - 52NM
fly-wheel -130nm
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm
SOURCE: big ends torque settings head torque
10 mm bolts
step 1 22 ft lbs.
step 2 60 degrees
step 3 additional 60 degrees
12 mm bolts
step 1 26 ft lbs
step 2 60 degrees
step 3 additional 60 degrees
SOURCE: require torque settings for a hyundai tucson 2008,gls petrol engine
Specifically which torque settings are you referring to. There are thousands to choose from. Please give an example such as "differential carrier", "cylinder head", "exhaust manifold to engine block" etc.
SOURCE: torque sizes for big end & main bearings
alldata.com
log in and read.
or join Hyundai form. real. google that.
SOURCE: torque settings for Hyundai h100 new spec 2.5
There aren't no torque specs for a torque converter if it makes your feel better go 90 lbs
236 views
Usually answered in minutes!
×