It needs the timing belt replaced, it broke while diving

The pistons will hit the valves on a lot of cars, but you should ask your Toyota dealer service dept for sure.
Hope this helps.

If the timing belt broke, your car won't run. Fortunately, it's not too expensive to replace, and as long as you are at it, may as well replace the water pump. Usually they have to dismount that in order to get at the timing belt. Generally that is that case, but it all depends on how each car is set up.

Whether 4-cyl or V6 there should not have been any, as these are non-interference engines, that is, the pistons do not hit the valves when timing fails. The engine just stops.

Hi,
some cars had the 'free wheel" feature if the cam belt broke, thus saving the valves. I do not think that your vehicle had the feature. However, if you gave more info0, ie, is the car running or not, then there might be an easy way to check the head out.

no you most likely bent valves on inlet side, pull the head and check for any other damage it all really depends on the rpm when the belt broke. ( rate me thanks )

My apologies for the delayed response. I am going back and answering questions that were never answered.
Click on the following Link. It has all the Diagrams for the Timing Belt you will need.
Before Clicking, let me know if this helped.
Again my sincerest apologies,,..


http://www.2carpros.com/car_repair_information/year/1992/make/toyota/model/camry/1992_toyota_camry_timing_belt_diagram_marks.htm

If your timing belt broke while driving, there WILL be engine damage. Valves will not be moving in response to your pistons continuing to move. I hope that it is not your timing belt. Check your ignition module, first, that's easier.

Hope this helps!

The 2002-2006 Camry received the next generation 2.4L 4-cylinder engine (model 2AZ-FE), which combines decent power with excellent fuel economy. This engine does not have a timing belt, it has a chain that does not need to be replaced.
The second choice is very smooth and powerful 3.0-liter 24-valve all-aluminum V6 engine.
Starting from 2004, the 3.3-liter V6 DOHC VVT-i engine is available on SE V6 model.
Both, the 3.0L and 3.3L V6 engines have a timing belt that must be replaced at certain interval

THIS IS A "FREE WHEELING" ENGINE DESIGN, U DON'T HAVE BENT VALVES.

If you are referring to the vehicle having a "Timing Belt", no, it does not have one.
The 2002 Camry 4 cylinder has a Timing CHAIN, and does not need to be replaced.