2003 Suzuki Grand Vitara Logo

Related Topics:

A
Anonymous Posted on May 08, 2014
Be the first to answer

Where is egr valve on vitara - 2003 Suzuki Grand Vitara

Answer This Question

2 Related Answers

tuyen bui

  • 1025 Answers
  • Posted on Mar 13, 2010

SOURCE: Wher do I find the EGR-valve on my Suzuki Grand

it's on the intake collector, you have to remove the intake collector then remove the egr valve from the intake collector

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on Sep 13, 2012

SOURCE: vitara how to blank off egr valve

Just remove the valve from the engine, two bolts on most and use a piece of brass shim stock (available from auto parts stores like NAPA) and cut a block off gasket to go under the valve. Use the old gasket as a template but of course don't cut the hole that exhaust gas goes through in the shim stock. The shim stock comes in various thicknesses so ask the parts counter person which would work best, around .006" should be fine as far as thickness goes. You can also use a soda can for the metal, but it may not last very long.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Egr flow insufficient
Depends on the year,make,model and engine size to determine the reason for the insufficient EGR flow which sets a p0401 engine code. If it is a Ford vehicle the most common failure is a bad DPFE sensor. If it is a GM vehicle with an electronic EGR valve, the valve is usually bad. Most imports use a EGR temp sensor which ends up being a bad sensor or vacuum line to the valve. Send me more info and I will be glad to help you fix the problem.
Read full answer
Feb 25, 2015 • Cars & Trucks
2helpful
1answer

Engine check light scan said egr insufficient flow . Change egr valve clean intake manifold check light still on
the tube that runs from the egr to the manifold may be plugged you need to take it off and clean it out .CAREFULLY do not bend or kink it, check for carbon build up
Read full answer
Feb 18, 2014 • 2000 Suzuki Grand Vitara
0helpful
1answer

How do I blank off egr valve on a 2007 suzuki grand vitara
which engine? of the many? (open hood and see?)
it needs to be cleaned.
and will fail EGR tests. and glow the CEL and throw EGR , DTC errors for ever and then smog fails and then the smog station fails you.

when you start the modern car, the PCM , resets the EGR to its closed position, if it cant do that (it can tell) it then cycles it to
clear any jams, my guess, is its sticking, so do as all mech do
world wide we clean it. (most cars its a 50,000 mile service point
which i guess, you skipped.)

ill not answer, blank pff. , as it's to simple,
cut a plate, drill hole, bolt it on. what part the , cutting or hole drilling is unknown?
Read full answer
Nov 21, 2013 • 2007 Suzuki Grand Vitara 4WD
0helpful
1answer

My egr valve on a 2007 suzuki grand vitara DDiS is clicking when I turn off the engine.
why would you do that. (if in usa its illegal and prove of tampering)
1: besides smog (NOX reduction) it does 2 other things.
2: it lowers exhaust valve temperatures, making them last and last.
3: it increase MPG, mileage. (can be proven easy with a simple test)
4: reduces PING, (detonation damage)
NOt only that, the ECU/PCM will fail the P04xx tests. and then not be able to inject or run spark advance correctly (see ping)

how to make a blank off, why? just unplug it.
Read full answer
Nov 21, 2013 • 2007 Suzuki Grand Vitara 4WD
1helpful
1answer

Vitara how to blank off egr valve
Just remove the valve from the engine, two bolts on most and use a piece of brass shim stock (available from auto parts stores like NAPA) and cut a block off gasket to go under the valve. Use the old gasket as a template but of course don't cut the hole that exhaust gas goes through in the shim stock. The shim stock comes in various thicknesses so ask the parts counter person which would work best, around .006" should be fine as far as thickness goes. You can also use a soda can for the metal, but it may not last very long.
Read full answer
Sep 13, 2012 • 2001 Suzuki Grand Vitara
1helpful
1answer

A P0401 code sets. I have done the egr valve three times on this car. I have cleaned the intake and the exhaust tube five times. The last time was only 1000 miles ago. The egr valves are new from the...

  • Restriction in the EGR passages, usually caused by carbon buildup
  • The EGR Valve is defective
  • Lack of proper vacuum or electrical signal to the EGR valve
  • Malfunctioning EGR Vacuum supply solenoid
  • Lack of proper EGR system feedback to the computer from the:
    • Manifold Absolute Pressure Sensor (MAP)
    • Differential EGR Pressure Feedback Sensor (DPFE)
    • EGR Valve Position Sensor (EVP)
    • EGR Temperature Sensor

    Read full answer
    Feb 28, 2011 • 2006 Suzuki Grand Vitara
    0helpful
    2answers

    Where is the piont where you plug in the diagnostic connector on a 2001 petral vitara
    The common faults on this engine are EGR valve and IAC valve.
    The EGR causes rough running and cutting out,
    The IAC causes just cutting out without the rough running, stalling at junctions etc is the usual complaint.
    If you pm me the cars reg, chassis no etc i could see if i could email you the manual its a pdf so should be quite straight forward.
    Read full answer
    Jun 19, 2010 • 2001 Suzuki Vitara
    6helpful
    2answers

    Wher do I find the EGR-valve on my Suzuki Grand
    it's on the intake collector, you have to remove the intake collector then remove the egr valve from the intake collector
    Read full answer
    Mar 13, 2010 • 2007 Suzuki Grand Vitara 4WD
    0helpful
    1answer

    Oil dripping off egr valve
    I had the same problem, but its not oil. it is coolant. running to the heater. just check for cracks on the little piece of hose on the egr. tri it...
    Read full answer
    Nov 18, 2008 • 2001 Suzuki Grand Vitara
    0helpful
    1answer

    Our Suzuki Grand Vitara runs fine most of the time, but will then start bunny hopping like it's running out of fuel. When the car slows to turn a corner - it stalls. Fuel filters have been checked by...
    I have a 2006, and I was just advised that it is the EGR valve, which cost 624.24 to replace. It is not a warranty item. Do you have any knowlege if this is an ongoing problem.
    Read full answer
    Sep 29, 2008 • 2007 Suzuki Grand Vitara 4WD
    Not finding what you are looking for?

    View Most Popular

    2003 Grand Vitara

    • Cars & Trucks

    Related Question

    Egr flow insufficient

    • Cars & Trucks

    149 views

    Ask a Question

    Usually answered in minutes!

    Popular Questions

    Suzuki Grand Vitara what does SYSTEM CHECK MEAN flashing on the radio

    2006 Suzuki Grand Vitara

    How to reset tire pressure light on a Suzuki?

    Suzuki Grand Vitara Cars & Trucks

    Esp light stays on on Suzuki grand vitara

    2007 Suzuki Grand Vitara 4WD

    I need the location of

    2002 Suzuki Grand Vitara

    Since I replaced the battery my car's engine shuts down.

    2006 Suzuki Grand Vitara

    Check Out the Latest Top Trucks Report!
    Check Out the Latest Top Trucks Report!

    View all Fixya Reports

    Top Suzuki Experts

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    15088 Answers

    john h

    Level 3 Expert

    29494 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...