2007 tl i don't know or emember ever using a code for my radio?? how would i reste it or find out?

You need to contact the dealer.

you proberly need to put a code number in if its a factory fitted radio it should be in with all your drivers handbook or radio manual if not you will have to go to a main dealer and ask them if they can get you the code

Typically to get the code you have to have the serial number of the unit and call a Honda dealership to get the code. Sometimes in years gone by, there was a credit card sized card that had a sticker with the serial number and code. Sometimes the sticker is even stuck on the owners manual or the inside of the glovebox.

It sound like you are going aftermarket so I would think that the code is not needed as the code was only for the factory radio itself, not the rest of the system (speakers, etc..) Call the radio installer and ask but I don't think you need the code.

The 5-digit radio code is printed on a plastic card, that is inserted in a slot inside the front cover of your user's manual. I have also read that it is SOMETIMES printed under the hood of the car as well (although not on mine). If you don't have ANY of the above, you'll have to see a dealer.

When you start the car, and the radio says CODE, all you do is key in the code numbers using
the radio presets buttons numbered 1-6 below the display.

If you mean the RADIO code........
The radio code is printed on a card, that is inserted in a slot at the front of your user's manual.

When you start the car, and the radio says CODE, all you do is key in the code numbers using
the radio presets buttons numbered 1-6 below the display.

Call an Acura dealership with that serial number and they should be able to provide you the code. Tell them you bring your car there for repairs and have purchased parts from them before.

Visit http://www.radio-code.com/index.htm

For the radio I know you have to do this: If you have jumped or replaced the battery at anytime this will happen. You have to get the serial number off the radio by removing it or partially taking it out to see the numbers on it try not to remove any cords. With the stereo out (to make sure you get the right number off of it) call an Acura dealership with the number and they will give you the another number to enter into the stereo and directions on how to punch the numbers in. Make sure while you have the stereo out you write the serial number down and keep it in a safe place also the number that the Acura dealership gives you because if you sell the car or if it happens again its easily accessible. Then call the dealership as you might have blown a fuse for the rest of the problems. Good Luck!

hold the reset button for 30 secs then will enter a new screen press the rest one more time than done

Turn on car key, turn on radio. Enter your 6 digit code, using the numbered preset channel buttons on the radio. My code for my 2003 is 16353. The radio should come on and start playing. May have to enter more than once.