List interference engines

do have to? there is never any answer to that, nu-diagosed.

no engine told. at all. just 4 banger
no VIN told and 8th digit is engine code.! post VIN .
crank sensor can be in 3+ places, front crank ,mid crank and rear.
yes some car with crank sensor behind fly wheel the tone slots are cut into the flywheel or the (flex plate) so yah tricky on some engines. (just so you know ropes)

if you google correct engine name + crank shaft.

you will see the tone wheel on the crank and bingo location
or read the service manual to learn this fast.

https://eautorepair.net/Marketing/Default.asp

I4 means zero to me
see why?? the wiki shows this generation used all 6 engines
2012 up.

Petrol:
2.0 L 4J11 I4
2.4 L 4B12 I4[29]
2.4 L 4J12 I4[30]
3.0 L 6B31 V6[31]<<< NO
Petrol PHEV:
2.0 L 4B11 I4
2.4 L 4B12 I4
Diesel:
2.3 L 4N14 I4 turbo[32]

if the engine has CAM belt it snapped, and both sensors fail but both sensor are good, and fails compression tests or worse
head poppet valves bent./
my guess someone (kids) put you up to this guess.
or did not scan he PCM
or did not inspect that cam belt?
Interference engines them. list

1. 1.5L Interference
2. 1.6L DOHC Interference
3. 1.6L SOHC Interference
4. 1.8L Interference
5. 2.0L DOHC Interference
6. 2.0L SOHC Interference
7. 2.3L Diesel Interference
8. 2.4L DOHC Interference
9. 2.4L SOHC Interference
10. 3.0L DOHC Interference
11. 3.0L SOHC 12 Valve Engine Non-Interference
12. 3.0L SOHC 24 Valve Engine Interference
13. 3.5L DOHC Interference
14. 3.5L SOHC Interference
15. 3.8L Interference

I flat refuse to do all of those with belt/chain, told.NO!

VW Engines and Timing Belts - a question - Page 1 ...

https://www.pistonheads.com > gassing > topic

Oct. 24, 2011 - To my knowledge, all of the VW water cooled, 8 valve, gasoline, engines, from the 1.5L to the 1.7L are Non Interference. I was a VW mechanic in ...
2010 VW Polo - Timing chain gone. - Page 1 - General ...
Mar. 29, 2015
Cambelt gone, engine write off? - Page 1 - General Gassing ...
Jan. 22, 2015
More results from www.pistonheads.com

Interference Engines - The Complete List - Your Car Angel

http://yourcarangel.com > Blog

A complete list of interference and non-interference engines by Your Car Angel. A broken timing belt/chain ...
Aug. 1, 2014 · Uploaded by YourCarAngel

mazda 6 2.3 L engine id l3v, l3x, vin code digit 8=c,z 2003-2008 shows as a chain driven engine
the instruction is --do not turn crankshaft
or cam shaft with chain disconnected so that instruction indicates that it is an interference engine

Urgently change the chain, it will cause wreckage in the engine!

Do not crank it, it will cause the engine cycle rotation and damage it.

I assume it's your timing belt, not a chain, which rarely, if ever snap. Depending on the make of the car and the engine you may, or may not, have serious engine damage.. DO NOT ATTEMPT to start the car, have it towed to your shop of choice. If there is no engine damage a timing belt replacement generally will run you 2 or 3 hundred bucks...if you did serious engine damage you may have to decide if the car if worth the money to have it repaired. What you need to know is whether your car has an "interference" or "non-interference" type engine.. In an interference type engine if the timing belt breaks the valves will "interfere" with the pistons as they travel up if the timing belt breaks, which results in generally catastrophic engine failure.. non-interference engines generally suffer little or no engine damage with a broken timing belt.. I broke a timing belt on my 1990 Toyota Supra going 70mph, but it was a non-interference engine and after having the belt replaced it was fine.. here is a good list someone put together on what type of engine is in your car.. you should find the engine type either marked on the engine or on a label under the hood, or the owners manual.. good luck. http://yourcarangel.com/2014/07/interference-engines-complete-list/

Broken timing chain is a very large problem, if it happened while engine is running. Bent/broken valves and such. Makes a LOT of noise, and engine stops immediately.

Your question doesn't include make/model/year, so your question isn't possible to answer. Doesn't really matter, though, if your timing chain broke. That's pretty rare. Timing belt, yes. Chain, no.

if it has a chain it is not recorded as an interference fit engine . IF it has a belt then it is an interference engine

No, it is not an interference engine. It also uses a timing chain, not a belt.

The 2.4L engine has a chain driven camshaft and is an interference type engine meaning that if the chain should fail the valves can be damaged by being struck with the pistons.

The 2.2 eco is a chain driven engine it does not have a timing belt but if for some reson the chain were to break I would imagine there would be some damage but having the chain break would be something I personally have never seen. Hope this helps