Adjust clutch in pt cruiser

SOURCE: clutch is starting to slip on my 2003 Chrysler PT Cruiser.

Hi
Sounds like you need a new clutch. There is no adjustment on these clutches.

SOURCE: when my 2006 pt cruiser gets hot it is hard to

I live in Tucson AZ and have the same problem with my 2006 Cruiser. During mild weather (below 90 degrees) the clutch behaves fine. When it gets hotter, as it always does in the summer, it gets very hard to shift. I had clutch work done at the dealer (replaced a slave cylinder) and they had a hard time getting it to bleed properly. Said it is tricky and requires a special technique or something. I like the car, but this is quite frustrating.

Mike Butler

• 6674 Answers
• Posted on Sep 08, 2009

SOURCE: PT CRUISER 2002 AUTOMATIC DOESNT CHANGE TO GEAR 3

Take it in & have it scanned, may only be a faulty solenoid or even brake switch may cause code & symptoms. Sooner you get it in, the cheaper it will probably be to repair it

SOURCE: my 2002 pt cruiser won't shift out of low.

the 2nd & 3rd gear solenoid needs replacing. It is mounted by the trans filter inside the trans pan

SOURCE: location speed sensor pt cruiser 03 touring car do

It sounds like the module is in limp mode. The speed sensor is most likely the cause, but it can be some other things as well. A scan will give a code stating the problem area.

The speed sensors are on the side of the trasmission that faces the front of the vehicle. There are 2 of them, and they are the same sensor. One is an input speed sensor located closest to the engine, the other is the output speed sensor.