Most likely that one of the ABS Wheel Sensors is disconnected or got damaged during repairs that you made. Check connectors for ABS wheel sensors at front brakes. If look ok, you need to check computer codes to know which sensor is damaged and replace sensor.
SOURCE: got new brakes but my abs service vehical soon
Most likely one or more bad wheel sensors. Very common problem on this car. However, you have to replace the entire hub assembly as it comes with the sensor attached.
SOURCE: abs light and trac off light on
hey, ihad this problem with abx and trac off light on all the time even after having replaced the wheel bearing twiice. how i fixed it was to replace the wiring harness and poof issue resolved. a technical service bulletin is available for this issue
SOURCE: 2001 impala- Traction, Abs, Brake lights on
abs sensor is built into hub[bearing]common problem when changing them and or brakes r that the sensor connection is not properly reconnected or wire got damaged recheck the sensor wiring and that connector is connected to clip by strut clip is part of system
SOURCE: abs light and brake light are on. also service
abs an trac control light on replaced abs wheel sensor lights still on
SOURCE: why won't the abs trac and service engine soon lights go off?
may be the fault codes still exist in your service system.
autocom for cars+ trucks
183 views
Usually answered in minutes!
×