My VSA, exclamation, and check engine light remain lit. I checked the code and it's P2649. I've replaced the VTEC solenoid and the VTEC assembly, but that did not fix the problem. Please help.
Did you clear the code after replacing the assembly?
did the assembly have the solenoid and oil pressure switch?
have you had the oil changed recently?
have you checked the oil level?
what engine size?
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
SOURCE: the vsa, !, and check engine light came on and are
check around the area of repair for loose ,damaged or disconnected wires or connections-especially the abs system if looks good than either bring back to mech and advise of trouble light on after repair or get scanned somewhere else most auto stores[ such as auto zone/advanced auto check ur local area] scan for free- the trouble code will give u a start point towards correcting ur problem
Somehow it is effecting the TPS (Throttle position sensor) This is the only input to go to third to fouth and not seeing the proper gear change VSA light appears.
1,106 views
Usually answered in minutes!
×