Rust on undercoated frame

SOURCE: What maintenance problems were / are the 1972 Corvette known for?

Not sure about the wiper issue but I'd ask him to see what he know or suspects is the problem. Body mount cushons can be found at most Corvette parts places (Mid America Corvette, Ecklers, ect...) I think there are 8 total..but that is a guess

http://www.ecklers.com/product.asp?pf_id=A9768&dept_id=1801

Rick Amick

• 73 Answers
• Posted on May 05, 2009

SOURCE: windshield removel

First you will need a chrome removal tool KD 2038 or similar. You slide it under the edge of the trim between trim and glass, and slide up or down until you can make contact with clip. This tool will pull the clip back and let the trim pop loose. Now removing the glass. You need to be very careful. I wear a pair of heavy leather gloves while cutting the glass out. I have a Blue Point brand # YA 109A cutter from Snap On but I'm sure you could find it in another brand. You get it worked under the edge of the glass and pull. I guess fine wire like piano wire will work but have never tried it.
You might also find that one of your glass people does a little work on the side and have them drop by and cut it out for you.
Good Luck and be careful

SOURCE: my Tahoe 4x4 came from up north and had a lots of

I have looked thru manual and cannot find any routing on these lines.My advice would be to find someone with a similiar tahoe/truck/suburban and look at it to compare. I do not have one in shop rt now but if i get one in today I will look and see where they go. Sorry couldnt be more help

SOURCE: Repair/replacement of 1997 chevy lumina rear

best solution is to locate a used one from southern states and replace it most from the north are all rotted from salt used on the roads.many junkyards are on the web just google used parts .com type in your info and you will get much results.

SOURCE: My Chevy 1990 Cheyenne 1500

there could be a pin hole shooting it up to the frame you need to check your fuel lines carefully