Lexus 2002 ES300 CD will not eject nor play display show Error 3. Can it be fixed
Dear,
I have different experiance with the C.Dplayer ( error 3 ) , there is no need to remove it nor send it to the dealer ,all you have to do when you have `` Error 3 `` is to reset the C.D player , by recycling the power supply ,this can be done by disconnecting the main car battery power supply , you must also keep the battery disconnected for at least one hour . then connect the cables to the batteries ,when you start the C.D player you will hear some clicking sound ,and watch the numbers of the C.D`s in the display you will find all what is inside has been detected by the display .
and your C.D player is back to normal..
i discovered ths by chance , when I had this error in the past ,coincidently I had to replace the battery and after installing the new batteries ,i was suprised to see the player back to normal condition by its self.
This was so, so, helpful... Thanks so much! Alternatively, other sites had offered suggestions and step by step procedure to take apart the dash etc, etc. All I did was disconnect the terminals and left it overnight, reconnected in the morning and by the time I got into the car, the CD was sticking out!!!!
I tried this twice. Once with the battery disconnected for 2 hours and once for overnight with no results. Any other suggesions?
×
It can be fixed, if you take it to a dealer they will take it out and ship it out to be repaired. or you can take it to your local stereo auto installers and they can fix it most of the time. some have a small reset button located inside the door where you load the cartrage.
9,712 views
Usually answered in minutes!
×