Central locking not working - 1995 Volkswagen Polo 1.4

Lots of help in this link. The VW Forums are always a good source of information.

Central locking not working!

VW Vortex - Volkswagen Forum
https://www.vwvortex.com > ... > Golf V & Jetta V
Dec 31, 2020 - The problem was the latch mechanism in the door. I had to take it out and apart and solder some board connections to the internal micro switch ( ...

Remote Central Locking Stopped Working - VW Vortex
Mar 18, 2021
Central locking not working after dead battery ' VW Vortex
May 28, 2017
Central locking doesn't work and radio is dead.. any help
Sep 16, 2006
Central Locking System Problems ' VW Vortex
Jun 3, 2005
More results from www.vwvortex.com Missing: 2.2 ‎ Microbus ‎ stops

Central Locking Not Working on Internal Switches

VW T6 Transporter Forum
https://www.t6forum.com > threads > central-locking-n...
Jan 15, 2023 - ALL the door locks do not respond either by the locking switches on the drivers door or by the key fobs. The indicators do flash however and a ...

Central lock on driver door not working, but works from key FOB
Aug 15, 2023
Central Locking Issue. ' VW T6 Transporter Forum
Nov 26, 2018
No Central locking / Alarm - VW T6 Transporter Forum
Nov 2, 2020
Central Locking Sequencing [Resolved - T6 Forum
Oct 17, 2022
More results from www.t6forum.com Missing: 2.2 ‎' Show results with: 2.2

Central locking not fully working

VW Tiguan Forum
https://www.mytiguan.com > threads > central-locking-...
Feb 3, 2018 - I have a situation where when I press the unlock or lock button on the key fob, the central locking doesn't seem to actuate.
https://www.google.com/search?q=Volkswagen+2.2+Microbus.+central+locking+stops+functioning

..

check lock servo in the door

I had that problem the other day
Battery dead charged it fitted it started car central locking for other doors only let go after I drove the car down the road
So it might work for you as well

no all is related to one fuse you can remove the door internal controls and decore and remove center lock motor plug and test two connectors with multimeter with set on 12v and then lock un lock door and check the reading of the multimeter if it read signal then all plugs and wires from central lock control unit to the door central lock unit is okay it this cae you have to replace the door central lock unit with the same if no signal is readed while you lock unlock the door then you have to check central control unit and all wire plus out of it to the door plug

2- you can remove central control unit from driver door and test it in passenger door (usually the same unit ) if it works with lock unlock its then the replaced unit is faulty and needs to be replaced if it not work then check plugs wires from central lock unit (usually found inside driver door ) to the central lock unit in passenger door

3- check signal for said door fro the output of central door unit if no signal then it mean that faulty central lock control unit

Google search it. You are not the first person this happened to.

Either it can be issue with blown fuse controlling the central locking or its issue with central locking control module.Many a times these module gets wet,due to water getting collected there and after that such problem starts.Clean the water and dry that area and recheck,if its working.

---------
For more help,i suggest click the link below and try the troubleshooting to resolve these issue:---

http://technoanswers.blogspot.com/2012/10/central-locking-not-working.html

--------

These will help.

Thanks.

FOR Central locking not working on 2000 Hyundai accent?Click the link below :-----

http://schematicsdiagram.blogspot.in/2012/03/this-is-how-system-operates.html

This will help.

Thanks.

CHECK THE DOOR LOCKS MAIN FUSE.

Hi I wonder if you can advise me ,my central locking and alarm is very unreliable it keeps making a beep before the ignition goes on and clicking,it sometimes sets the alarm off,Ive had the AA round and theyve told me the car battery is dead,which I appreciate,but think the key hub central locking or alarm is running the battery low does the hand held button need a new battery,or can I take the fuse out for the central locking,dont want to pay 66 quid for a new battery if I can pay 2 quid for a new battery for the central locking button,or demobilize it

it is more than likely the drivers door latch assembly