KIA K2700 TIMING MARKS - 2004 Chevrolet Cobalt

2000 Kia K2700 engine fastener tightening specifications

garage.wiki https://garage.wiki > ... > First generation facelift
2000 Kia K2700 First generation facelift Engine Fastener Tightening Specifications ; Crankshaft central screws, 258.15-287.65 lbf?ft 258.15-287.65 lbf?ft 350- ...

i uses this

https://eautorepair.net/Marketing/Default.asp

Makes no difference where the piston is, no matter the make of the vehicle, the timing marks on the gears MUST line up with each other or by factory settings if a chain is used on an overhead cam. I don't know Kia operations or settings, it's just a normal rule that the marks on the gears must always be adjacent to each other in order for all cam timing to be correct. This isn't timing the firing of the cylinders, that's through the distributor setting. Your just timing the cam with those marks. Distributor timing marks are on the balancer on the front of the crankshaft, which you've yet to put on.

Buy a cheap shop manual for this and so much more.

Fix your Truck right away, by clicking the link.

Kia k2700 Workshop Service Manual

check the valve timing marks as this is typical of valve timing out

Do you mean Set the timing on a Kia K2700 truck?

ALIGN THE TIMING MARKS AS PER THE ATTACHED FOTO. on the gears there are timing marks.