Cruise not available - 2002 Jaguar X-Type

If you lose Cruise Control ability, it means the Cruise Control, which is a pneumatic system controlled by small valves, is leaking. Check out the Cruise Control subsystem.

You can probably find one. First determine the year, make, and model of your vehicle, then search at Google for "service manual". Check available manuals to ensure they have a wiring diagram (factory service manual is best option if available).

It could be the brake pedal switch, it often occurs it fails in our kitty. If your car (as mine) is equipped with a cruise control, this could be associated with the msg "cruise control not available" too (or something similar).
In this case you can fix (or change) that switch. The worst is to dismount it... ;-)

Good chance

Italianation

What is the fault code? If you don't know you need to have it tested with a scanner that reads all JAG codes, that means the dealer.

Cruise control is an available option on a 1992 Pontiac Bonneville. Not all of them had them. Climate control was also available.----------------------------------------------------------------------------------
Multidiag Actia J2534

Possibly. Have you had it in to the dealer for service lately? There was a cruise control recall on that model. Dealers were told to disconnect the cruise until replacement parts were available. You could also try lifting the brake pedal with your toe while trying to engage the cruise system, If the brake pedal switch is out of adjustment it will not let the cruise activate. Always check fuses first though.

I had double trouble with mine doing this. Had to have Tranmission rebuild and engine had vacum leaks. Hope yours is vacum leaks.

PCV hose. I had the same problem...Hear air escaping from mine..I just put some hose tape over mine, and when I got the cruise not available and check engine again, sure enough..tape was coming off...replace the hose..problem solved.

Felicia

Hi Don

I recomend you try this first of all.

Try disconnecting the positive battery + & negative - terminals.

Turn the ignition key several times to erase the computers memory.

Reconect the battery + terminal and then - and start the car.

Your fault code, will hopefully not return.

Good Luck !


John.

I have the same exact problem. guys please help!