Cars & Trucks Logo

Related Topics:

Posted on Jul 18, 2017

Mazda 323 familia automatic is not changing gears only 1,2 and R

My mazda 323 familia automatic is not changing gears properly. it only shifts Reverse, 1 and 2 after the second gear is flashes a hold light on the deshboard what could be the problem? i was imported from singapore Ichanged my manual transmission gear to automatic gear. problem is that gear changing from gear 2 to 3 is slow reaching the rpm to 3. what should I do and is there a way to adjust and solve this problem.

2 Related Answers

Anonymous

  • 63 Answers
  • Posted on Mar 10, 2009

SOURCE: mazda 323 familia automatic is not changing gears only 1,2 and R

hi

it seems that the gear bushings have worn out. you need to take your car to a mechanic to have the bushings changed. Also, please check it your car has enough Automatic Transmission Fluid.

i am always here
kind Regards
RAhUL_hunk

Ad
johnf1aresti

ARESTI

  • 1152 Answers
  • Posted on Sep 10, 2012

SOURCE: My mazda 323 familia automatic transmission is not changing gears.

Use a scanner to confirm whether you might have a fault on the automatic gearbox,or the gear box ecu is not working or the gear box is un serviceable and needs replacement.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Mazda Familia 323. How can I replace the clutch plate?

Question edited to add maker.
Question moved to sub category.

Will be similar to the ones in the videos.

https://www.google.com/search?q=Mazda+Familia+323+replace+clutch

..
0helpful
1answer

Mazda 323 familia 1997 "blinking hold"

The best solution you'll get from books at www.reliable-store.com

These are books containi ng info on repair, service, troubleshooting, parts info, assembling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc.
0helpful
1answer

My mazda familia automatic is not shifting to 2,3,4 gear

Hi there
Well it sounds like you have either trans oil problem or pump problem or convertor problem but all these will be stopping the the pump in the box from shifting up the last 3 gears as it has to tighten the bands on forward and another for the reverse.
Not unless you have a problem with the selector going in to the g/box.
Other wise call into the automatic trans people and get it checked before you do internal damage. then it starts getting big $$$$$$$$$$
1helpful
1answer

No reverse shift?

I would say you have broken you reverse band, the only cure is remove the gearbox(major), Does you gearbox have a reverse servo, it is normally on the side of the box
0helpful
1answer

My mazda 323 familia automatic transmission is not changing gears.

Use a scanner to confirm whether you might have a fault on the automatic gearbox,or the gear box ecu is not working or the gear box is un serviceable and needs replacement.
0helpful
1answer

What would be the torque setting for the cylinder head of a mazda 323 familia with a b6 engine, twin cams. thanks.

Remember you have pre loaded cam gear's that have to be loaded, or it will make kinda of a lifter noise but not lifter's.
Torque
step #1 17-19 ft.lbs
step #2 additional 85-95 deg
0helpful
2answers

1997 Mazda 323 Familia a/t wont run immediately

sounds like torque converter but also check shifter alignment.
0helpful
1answer

I have a mazda astina familia 1.5 automatic. i have had the transmission checked by a technician and it is fine. i am getting power loss from engine.it seems the engine has to go into high revs before...

i think you need a new mechanic, i got that problem twice, each time the transmission had to be changed because the 1st gear was shot. i eventually changed to a 5fwd gear-box which increased performance like you would never imagine.
0helpful
1answer

Mazda 323 familia automatic is not changing gears only 1,2 and R

hi

it seems that the gear bushings have worn out. you need to take your car to a mechanic to have the bushings changed. Also, please check it your car has enough Automatic Transmission Fluid.

i am always here
kind Regards
RAhUL_hunk
Not finding what you are looking for?

298 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...