Replace headlamp acura tl 2000 3.2 - 2000 Acura TL

Or just spark plugs or wires. Or Distributor/ignition. check the cheap things first. Also, replace your fuel filter.

On this website you find fuse box diagram and description for Acura TL (2000)

Acura TL 2000 wiring diagrams fuse panel CARKNOWLEDGE

On this website fuse box diagram and description for Acura TL (2000)

Acura TL 2000 wiring diagrams fuse panel CARKNOWLEDGE

Check these websites you find there fuse box diagram and description for Acura TL (2000)

Acura TL 2000 fuse box diagram Auto Genius

http://www.carknowledge.info/acura-tl-2000-wiring-diagrams-fuse-panel

looks like you do for drivers. check out this link
http://www.acuraworld.com/forums/f47/2001-tl-headlamp-replacement-procedure-92343/

it's the top number on the sticker on the inside of the glove box.

ya no prb u can do that for the front wheels...but careful that u better check the bearings of rear wheels also...so that it will be safe drive for u!!!!

replace the climat control.(over the radio on the dash).

what do you need? bulb size?

Look for the end of the wire retainer clip. Unhook it and lift it up. Remember not to touch the bulb. But if you do, just clean it with a bit of alcohol.

btw - Here's a bit of info from a previous post of mine...
The low beams consist of three parts. The bulb, inverter/ballast and the ignitor. The bulbs usually start to loose their color long before they burn out. The inverters/ballasts either go out after a while or take a while to start up.

Before you spend money on a new bulb, try swapping it with the one on the other side. You'll need a security torx screwdriver to get the covers off of the back of the lights. Don't touch the glass bulbs. If you do, just clean them with a bit of alcohol.

If the problem stays on that side, try swapping the ignitors. They're mounted inside the black covers.

If the problem is still on that side you've got a bad inverter. They're mounted on the bottom of the headlight assembly. You'll need to remove the front bumper and remove the headlight assembly to get to it. (I recommend you take pictures as you remove things so can put them back together correctly.)