Will shift into all gears fine plenty of clutch but when trying third it grinds
SOURCE: 1991 jeep wrangler sahara shifting promblems
Your clutch is not disengaging. If it a hydrolic clutch chk. the fluid in resavor, Or slave cyl. for the clutch is bad, Or it has got air in it and needs to be bleed. This is a clutch problem, nothing wrong with trans. If its a manual clutch linkage its an ajustment thing. My best guess if its hydrolic slave cyl. went bad, or resavor is out of fluid.
SOURCE: My third gear grinds when i shift to third it
Has the transmission been serviced? A transmission oil change and lubricant additive may help, however, it sounds as though you have a 3rd gear synchronizer going bad. Verify the shift linkage is not worn and is secure at the shifter and transmission be for spending any cash. If the linkage is good and the fluid change does not help after 150 miles, you might want to visit your favorite transmission shop.
Good luck and let me know.
Regards,
SOURCE: tranny slips & wont shift past 2nd gear
tranny slips can also mean that you may need to change the tranny filter. But just like cooking oil at first it is thick then you add heat and it gets thinner, same for tranny oil which could also mean that your tranny needs gear and plate work. The easiest way to find out is to insert the oil dip stick, clean it with a paper towel and check to see if you can see metal shivers or if the color of the tranny oil is not red but silverish, these are usually indictative of a tranny that needs an overhaul. hope this helps.
Good Luck =)
SOURCE: when i shift into third the gears grind.. why?
sounds like the syncromesh has gone in the gearbox. If you dont want them to grind, you,ll have to double declutch. I f you cant do this, get a new gearbox.
SOURCE: Tranny wont shift from third gear.
You have a solenoid bad in the trans. Will need to drop the pan to replace part. Most likely a code is stored in the computer to help direct the technician.
135 views
Usually answered in minutes!
×